11 June 2024 in IEEE Transactions on Power Electronics
In this letter, an integrated wired/wireless charging topology is proposed to expand the adaptability of the electric vehicle charging stations and further improve the utilization of the charging facilities and venues. By reusing the common structures in the independent wired and wireless charging topologies, on the basis of achieving the wired and the wireless charging function, the integration of charging facilities is improved and its cost is reduced. Based on the isolated converter in the wired mode, a frequency tuning strategy in the wireless mode is proposed to overcome the frequency detuning problem caused by the parameter fluctuations. The feasibility and practicability of the proposed topology and the frequency tuning strategy are verified by the experiments.
7 August 2023 in IEEE Transactions on Transportation Electrification
In this paper, an improved modulation strategy for the three-phase matrix converter based wireless power transfer (WPT) system is proposed to enhance the system security and reduce the total harmonic distortion (THD) of the grid current. By analyzing the effect of the switching delay on the standard current space vector PWM (CSVPWM), it is revealed there is the risk of the over-voltage and over-current faults in the process of the vector switching. It also causes the synthesis current vector length error and causes the grid current distortion. To enhance the security and reliability, a switching logic of the current vectors suitable for both the resonant and non-resonant states of the compensation network is proposed. Furthermore, an optimal calculation method of the effective current vectors switching moments is proposed to reduce the grid current THD. The feasibility and practicability of the proposed modulation strategy are verified by the experiments.
24 May 2024 in IEEE Transactions on Power Electronics
In order to improve the integration and life time of ac voltage input wireless power transfer (WPT) system, a topology based on electrolytic-capacitor-less matrix converter with inductor-capacitor-capacitor-series (LCC-S) resonant network is proposed. The relationship between the conversion ratio of the output and input voltages and resonant parameters are analyzed. It reveals although the boost operation is achieved by the parameter design of LCC-S network, it makes the system sensitive to the parameter variations. In order to extend the voltage conversion range, the improved two-stage WPT system based on the single-stage one is proposed. The dual-side closed-loop control of the two-stage system without the wireless communication is further proposed. The corresponding small-signal model is built and the parameters of the closed-loop controllers are designed. The feasibility and practicability of the proposed system are verified by the experiments.
5 July 2024 in IEEE Transactions on Transportation Electrification
In this paper, the LCC-S network and semi-active rectifier (SAR) are integrated with the matrix converter (MC) based wireless power transfer (WPT) system to achieve the wide ranges of buck and boost conversion and power regulation without using the electrolytic capacitors. The life time and adaptability of the WPT system are improved. According to the analysis of the system characteristics, it reveals there are two degrees of freedom in the novel topology, including the primary compensation inductance ( L f ) and rated primary MC current ( I fn ). The power loss model as the functions of L f and I fn is built for the first time. It reveals L f designed according to the rated port voltages causes the LCC-S-SAR WPT system to deviate from the maximum efficiency point. Taking the goal of maximizing efficiency as the constraint, a global optimization design method for L f and I fn based on the power loss model and the particle swarm optimization algorithm is proposed. The correctness and practicality of the proposed design method are verified through the experiments.
29 March 2024 in IEEE Transactions on Transportation Electrification
In order to solve the problems of low operation efficiency and short life time of medium-voltage (MV) AC grid-connected converter, a topology of AC Side connected-in-series modular quasi-single-stage isolated AC-DC converter is proposed in this paper. The electrolytic capacitor applied in the traditional two-stage topology is removed in the proposed topology to improve the life time and power density. An improved triple-phase-shifted modulation strategy to minimize the transformer current is adopted in each module to achieve the full soft-switching operation and improve the efficiency. A mathematical model is built to analyze the reasons for the unbalance of the capacitor voltage on the AC side of each module and the effect of grid harmonics on the grid current. A system level closed-loop control strategy is proposed, which includes the AC side voltage balance control of each module and the grid current closed-loop control, to achieve the voltage balance and high grid connection performance. The feasibility and practicability of the proposed topology and control strategy are verified by the experiments.
10 June 2026 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
The use of a matrix converter (MC) and a semi active rectifier in the wireless power transfer (WPT) system enables wide-range buck–boost operation and power regulation while completely eliminating electrolytic capacitors. In this paper, a dual-side closed loop control strategy is proposed to achieve high-quality grid current and constant-current/constant-voltage charging. The system is under-constrained, with the primary MC current serving as a free variable. An efficiency model is established to identify the optimal current that maximizes system efficiency under varying grid voltage, battery voltage, charging current, and mutual inductance. To adaptively track this optimal point, a genetic algorithm-optimized neural network (GANN) based maximum efficiency tracking (MET) method is developed. The genetic algorithm minimizes redundant neurons, achieving higher prediction accuracy and lower computational complexity, thereby facilitating real-time DSP implementation. Experimental results confirm that the proposed GANN-based MET method achieves high efficiency over a wide operating range.