21 May 2021 in IEEE Open Journal of the Communications Society
This paper describes and investigates a novel concept of frequency-domain spectral shaping (FDSS) with spectral extension for the uplink (UL) coverage enhancement in 5G New Radio (NR), building on discrete Fourier transform spread orthogonal frequency-domain multiplexing (DFT-s-OFDM). The considered FDSS concept is shown to have large potential for reducing the peak-to-average-power ratio (PAPR) of the signal, which directly impacts the feasible maximum transmit power under practical nonlinear power amplifiers (PAs) while still meeting the radio frequency (RF) emission requirements imposed by the regulations. To this end, the FDSS scheme with spectral extension is formulated, defining filter windows that fit to the 5G NR spectral flatness requirements. The PAPR reduction capabilities and the corresponding maximum achievable transmit powers are evaluated for a variety of bandwidth allocations in the supported 5G NR frequency ranges 1 and 2 (FR1 and FR2) and compared to those of the currently supported waveforms in 5G NR, particularly π/2-BPSK with FDSS without spectral extension and QPSK without FDSS. Furthermore, an efficient receiver structure capable of reducing the noise enhancement in the equalization phase is proposed. Finally, by evaluating the link-level performance, together with the transmit power gain, the overall coverage enhancement gains of the method are analyzed and provided. The obtained results show that the spectrally-extended FDSS method is a very efficient solution to improve the 5G NR UL coverage clearly outperforming the state-of-the-art, while being also simple in terms of computational complexity such that the method is implementation feasible in practical 5G NR terminals.
23 July 2025 in IEEE Open Journal of the Communications Society
Sub-THz communications are envisioned to unlock ultra-high data rates, ultra-low latencies, and massive connectivity in future wireless systems by utilizing bandwidths of up to tens of GHz. This paper presents the holistic perspective on sub-THz communications developed within the European sixth-generation (6G) flagship project Hexa-X-II. According to this perspective, successfully deploying sub-THz systems will require addressing several physical-layer (PHY) challenges associated with the harsh signal propagation and hardware limitations. In addition, sub-THz systems will drive advancements in essential wireless applications beyond communications, such as joint communications and sensing (JCAS). In this context, we present a collection of technical contributions and key findings from the Hexa-X-II project that have shaped this perspective. In contrast to existing works, these efforts collectively tackle the fundamental PHY challenges of sub-THz communications, i.e., understanding and modeling of radio propagation, radio-frequency (RF) power consumption and complexity, and hardware impairments. To achieve this, we present several results across three core areas, i.e., signal propagation and channel modeling, RF transceiver design, and PHY enablers, offering useful insights into the development of sub-THz systems. Lastly, we provide an overview of sub-THz JCAS, emphasizing it as one of the most promising applications in the sub-THz range.
20 January 2022 in IEEE Networking Letters
A machine learning enabled link adaption (LA) and scheduling framework is presented for Industrial Internet of Things (IIoT), leveraging quasi-periodicity of traffic in IIoT. The following steps are introduced: i) a reduced complexity link establishment accounting jointly for beamforming and load management; ii) interference prediction using long short-term memory neural networks; iii) semi-coordinated scheduling based on node grouping for interference avoidance. Through numerical evaluation it is demonstrated that the proposed approach can substantially improve average spectral efficiency by as much as 62% in a realistic IIoT scenario at negligible overhead.