Dalei Li

Dalei Li

Auto-generated profile, based on publicly available information

Dalei Li

School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2020 in Metals
Verified
Journal Article
Open access
PDF file
YLYANG Li
YANG Li
ZLZhengtong Lu
Zhengtong Lu
TLTingchao Li
Tingchao Li
DLDalei Li
Dalei Li
JLJinsheng Lu
Jinsheng Lu
YZYun Zou
Yun Zou
In this study, two innovative surface severe plastic deformation (SSPD) methods, namely abrasive waterjet peening (AWJP) and ultrasonic nanocrystal surface modification (UNSM), were applied to a 304 stainless steel to improve the mechanical behavior. The surface roughness, microstructure, residual stress, hardness, and tensile mechanical properties of the alloy after the two SSPD treatments were studied systematically. The results show that both the AWJP and UNSM treatments have greatly positive effects on the mechanical-properties improvements by successfully introducing a hardening layer. Especially the UNSM-processed specimen possesses the most outstanding comprehensive mechanical properties (high strength with the comparable ductility). The yield strength with the UNSM treatment is 443 MPa, corresponding to the 109% and 19% improvements, as compared to that of the base (212 MPa) and AWJP-treated specimens (372 MPa). The results can be attributed to a much thicker hardening layer (about 500 μm) and a better surface integrity with lower roughness (Ra: 0.10 μm) formed by the UNSM technique.

27 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
Zhanshu HeZhanshu He
Zhanshu He
CLChao Li
Chao Li
Shusen ZhaoShusen Zhao
Shusen Zhao
BCBeibei Cui
Beibei Cui
DLDalei Li
Dalei Li
Ting FuTing Fu
Ting Fu
The water jet peening (WJP) technology can induce compressive residual stress (RS) in metal surfaces and, thus, improve the fatigue life of components. In this paper, a mathematical model is proposed for calculating the RS induced by WJP. To validate the proposed mathematical model, experimental and finite element simulation verifications were carried out on Al6061-T6. The distribution of RS along the depth direction, the maximum compressive RS, and the depth of the compressive RS layer were also investigated based on the mathematical model. Results showed that the error of maximum compressive RS between the mathematical model and experiment was within 9% under a jet pressure of 60 MPa, and the error of depth of the compressive RS layer between the mathematical model and experiment was within 13% under a jet diameter of 0.3 mm. Hence, the mathematical model is reliable and accurate. The maximum compressive RS increases with the increase in jet pressure, and the depth of the compressive RS layer approximately linearly increases with the increase in jet diameter.