The stray load losses (SLLs) in electrical machines represent a nonnegligible contribution of the total losses and a key point for an accurate evaluation of the energy efficiency of considered device. In this paper, one aspect of these SLLs, the end-region leakage fluxes and losses, is investigated and considered for the case of a high-power cage induction motor. The study is performed at locked rotor, no-load, and rated load conditions using a 3-D finite-element modeling approach. The influence of the leakage flux on the end-region conductive parts of the motor is analyzed together with the eddy current loss calculation. Finally, the SLLs are calculated and compared with the experimental measurements based on the IEEE standard 112-method B test.
Regularly used in power transformers, grain-oriented (GO) steels are also usually chosen for the manufacturing of the stator cores of hydro and turbo-generators. These steels are renowned for their high magnetic performances in the rolling direction (high permeability and low magnetic losses). Nevertheless, in a turbo-generator where GO steels are employed to reduce the size of the stator core, the magnetic flux flows through several successive directions within the plane of the steel. So, the anisotropic behavior of the GO steel has to be considered in the design step of the related devices in order to improve their energy efficiency as well as their diagnosis based on modeling. In this paper, an anisotropic phenomenological iron loss model, quite recently developed, has been studied and successfully implemented in a finite element method (FEM) simulation environment. The implementation has been validated against experimental data achieved on an industrial conventional GO grade typically used in turbogenerators. The results show a good agreement of the computational results with the experiments for both quasi-static and dynamic regimes.
Organizing international conferences leads to significant amounts of emitted greenhouse gases (GHG's). This is mainly due to the transport of the attendees to the conference venue. At IEEE-VPPC'14, actions were taken to reduce and to compensate the conference GHG emissions as well as to raise public awareness. This paper describes these actions and presents a quantitative estimation of the GHG sources related to the conference.
18 December 2013 in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
EPE’13 ECCE Europe has been organized in Lille in September 2013 according to a carbon care philosophy. Different actions have been developed to reduce the equivalent greenhouse gases emitted by the conference. Moreover, mitigation actions have also been achieved after the conference to obtain a carbon-neutral conference. All these actions are described in this paper.
An improved starting point Newton method applied to 3-D scalar formulation in magnetostatics is proposed in this paper. Compared with the classical Newton method, the inexact-Newton and quasi-Newton methods are reported by testing on a benchmark problem as well as an industrial example. Remarkable convergence acceleration using the proposed strategy is observed, and thus, it significantly reduces the computational time.