Research Center for Advanced Materials, National Research and Innovation Agency (BRIN), Kawasan Puspiptek gedung 440, Tangerang Selatan 15314, Indonesia
Auto-generated profile, based on publicly available information
Fredina Destyorini
Research Center for Advanced Materials, National Research and Innovation Agency (BRIN), Kawasan Puspiptek gedung 440, Tangerang Selatan 15314, Indonesia
Zn-air batteries (ZABs) with neutral electrolytes offer a significantly longer lifespan and better recyclability than alkaline ones. However, low-performance bifunctional catalytic activities for oxygen reduction or evolution reaction (i.e., ORR/OER) in neutral electrolytes still hamper their development. Here, we report iron nanoparticle-decorated nitrogen/boron co-doped reduced graphene oxide aerogel (Fe-NBrGO) with distinguished ORR/OER activity, enabling its application in neutral rechargeable ZABs. Taking advantage of the formation of 3D porous structure of graphene aerogel, N/B-moieties active sites, and Fe-containing active sites, Fe-NBrGO exhibits high ORR onset potential (1.074 and 0.817 V) and adequate OER overpotential (476 and 615 mV) in alkaline and neutral electrolytes, respectively. Fe-NBrGO enables the production of a neutral-ZAB with 34 mW cm−2 in peak power density and remains stable for a 284 h (~852 cycles) cycling test. This research highlights the rational design of highly active oxygen catalysts for the widespread implementation of new energy storage technologies.
Pack chromizing and aluminizing has been widely used for many years to improve hot temperature oxidation and corrosion resistance of metals. The coating process involves packing the steel in a powder mixture which contain aluminum and chromium source, and inert filler (usually alumina), and halide activator . Al and Cr were deposited onto carbon steel by pack cementation process using elemental Al and Cr powder as Al and Cr source, whereas NiCo alloys codeposited by electrodeposition. The position of Al and Cr could be under or over Ni-Co alloys deposited. Pack cementation was heated on dry inert gas at temperature 800 °C about 5 hours and 20 minute for Cr and Al respectively. Al and Cr was successfully deposited. Laying down effect of Al and Cr onto carbon steel whether up and down toward NiCo alloys coating have affected to oxidation resistance. The pack aluminizing as top layer given best resitance to restrain excessive oxide scale, in contrast pack chromizing reveal bad oxidation resistance, moreover occured spallation on layer.