12 July 2019 in Biofabrication
Engineered tubular constructs made from soft biomaterials are employed in a myriad of applications in biomedical science. Potential uses of these constructs range from vascular grafts to conduits for enabling perfusion of engineered tissues and organs. The fabrication of standalone tubes or complex perfusable constructs from biofunctional materials, including hydrogels, via rapid and readily accessible routes is desirable. Here we report a methodology in which customized coaxial nozzles are 3D printed using commercially available stereolithography (SLA) 3D printers. These nozzles can be used for the fabrication of hydrogel tubes via coextrusion of two shear-thinning hydrogels: an unmodified Pluronic ® F-127 (F127) hydrogel and an F127-bisurethane methacrylate (F127-BUM) hydrogel. We demonstrate that different nozzle geometries can be modeled via computer-aided design and 3D printed in order to generate tubes or coaxial filaments with different cross-sectional geometries. We were able to fabricate tubes with luminal diameters or wall thicknesses as small as ∼150 μ m. Finally, we show that these tubes can be functionalized with collagen I to enable cell adhesion, and human umbilical vein endothelial cells can be cultured on the luminal surfaces of these tubes to yield tubular endothelial monolayers. Our approach could enable the rapid fabrication of biofunctional hydrogel conduits which can ultimately be utilized for engineering in vitro models of tubular biological structures.
19 June 2017 in Polymer Chemistry
Triple stimuli-responsive ABA triblock copolymer hydrogels composed of poly(allyl glycidyl ether)-stat-poly(alkyl glycidyl ether)-block-poly(ethylene glycol)-block-poly(allyl glycidyl ether)-stat-poly(alkyl glycidyl ether) were synthesized using controlled ring-opening polymerization of glycidyl ethers. These polymers form triple stimuli-responsive hydrogels that respond to temperature, pressure (shear-thinning), and UV light. The stimuli-responsive behaviors of the gels were dependent upon the composition and the molecular weight of the ‘A’ blocks of the triblock copolymers. The hydrogels were analyzed rheometrically to characterize their stimuli-responsive properties. The optimized compositions were 3D printed using a direct-write 3D printer to afford robust 3D objects. We anticipate these materials creating new opportunities in the biomedical and biotechnological fields, by enabling the simple and rapid fabrication of 3D hydrogels.
30 October 2018 in Polymer International
17 March 2017 in Journal of Macromolecular Science, Part A
A series of poly(ethylene glycol) monomethyl ether-block-poly(2-(dimethylamino)ethyl methacrylate) (mPEG-b-PDMAEMA) diblock copolymers were synthesized using atom transfer radical polymerization to achieve controlled polymer molecular weight and narrow molecular weight distribution. The thermoresponsive properties of the mPEG-b-PDMAEMA diblock copolymers in aqueous buffered solutions were determined using UV-Visible spectroscopy and dynamic light scattering. The cloud point, a soluble-to-insoluble transition, was observed for all mPEG-b-PDMAEMA diblock copolymer solutions. Increasing either the mPEG or PDMAEMA molecular weight resulted in a decrease in observed cloud points as a function of pH and polymer concentration. Changing the mPEG molecular weight determined whether a second, higher temperature, thermal transition was observed as a function of pH and polymer concentration. Controlling the thermoresponsive properties of mPEG-b-PDMAEMA diblock copolymers through polymer composition, concentration, and pH enables the tailoring of these copolymers for applications ranging from non-viral gene delivery to use as a strengthening agent in paper.
23 August 2022 in Biofuels, Bioproducts and Biorefining
17 September 2020 in Polymer Chemistry
The fabrication of hydrogel materials has gained increased attention for a broad range of biomedical and biotechnological applications. However, one longstanding challenge in the field is to develop hydrogels that can be easily processed into the desired form factor, while achieving the necessary final physical and biochemical properties. Herein, we report a shear-thinning hydrogel ink that can be photo-cured to create a stretchable, suturable hydrogel whose polymer network is formed via the combination of thiol-Michael addition and radical polymerization. A shear-thinning hydrogel based on bis-methacrylated Pluronic® F-127 was modified with varying equivalents of 2,2′-(ethylenedioxy)diethanethiol (EDT) as an additive. We observed that aging the hydrogel over time prior to extrusion allowed the relatively slow thiol-Michael addition to occur (between thiol and methacrylate) prior to UV initiated photopolymerization of the methacrylates. The viscoelastic properties of these hydrogels could be tuned based on the amount of EDT added, and the aging time of the hydrogel formulation. The changes to the physical properties of the hydrogels were attributed to the increased chain length between network junctions that resulted from the thiol-Michael addition reactions. The optimized hydrogel composition was then extruded from a coaxial nozzle to produce hydrogel tubes that, after curing, were resistant to tearing and were suturable. These extrudable synthetic hydrogels with tunable viscoelastic properties are promising for tissue engineering applications and as surgical training models for human vasculature.