6 May 2022 in Smart Materials and Structures
Auxetic materials and structures have a negative Poisson’s ratio and it is this unique property that differentiates them from traditional materials. In recent years, three-dimensional (3D) auxetic structures have attracted considerable interest with the emergence of advanced manufacturing technologies. Many studies have been carried out to determine the mechanical properties of the existing 3D structures or improve and develop new ones, and extensive research is ongoing. This paper presents a comparative numerical study of two-dimensional (2D) and 3D geometries of four different auxetic structures, namely: elliptic holes, lozenge grids, re-entrant and arrowhead. Among these structures, elliptic holes and lozenge grids are designed and studied in 3D for the first time in this study. The structures are analysed under axial tension and the Poisson’s ratio, Young’s modulus and stiffness values are obtained from linear finite element model analysis. In addition, the unit cells of the 3D structures are examined. The findings showed that the elliptical holes structure exhibits a higher negative Poisson’s ratio than other auxetics and the 3D re-entrant and 2D arrowhead structures outperform the other auxetics with respect to the Young’s modulus and stiffness values.
13 December 2022 in Challenge Journal of Structural Mechanics
In this study, a novel auxetic structure, namely RDN, is presented in two- and three-dimensions. The unit cells are created by modifying the conventional re-entrant structure and the 2D and 3D structures are formed by multiplying these unit cells. Finite element analyses are conducted to study the deformation mechanism of these structures under uniaxial tension, and the mechanical properties of the structures are obtained. Also, a 3D unit cell is modelled with different strut thickness values to examine the effect of the strut thickness on mechanical properties. Numerical models are developed using ANSYS/Static Structural software and linear elastic analyses are performed by applying small displacements to the structures. It is found that the 2D and 3D RDN structures possess a high negative Poisson’s ratio but relatively small stiffness compared to the other auxetics. The analyses of the 3D unit cells showed that increasing the strut thickness led to higher stiffness values but reduced auxetic behaviour of the structure.