In this article, we demonstrate that the combination of ToF-SIMS, magnetic SIMS (M-SIMS), and high-energy x-ray photoelectron spectroscopy (HAXPES) is a powerful, comprehensive approach to study the quality of buried interfaces in III–V-based heterostructures. This multitechnique method enables us to track rigorously possible interdiffusion of key elements (In, Ga, As, Al, P) and dopants. Sharp interfaces were observed from ToF-SIMS profiles acquired with an upward depth resolution as low as 1.5 nm using a Cs+ sputtering source. For the detection of Zn doping in the layers, M-SIMS was preferred to ToF-SIMS thanks to its superior sensitivity. HAXPES was finally found to be a very complementary technique to check the abruptness of the top InGaAs/InP buried interface, taking benefit of its deeper probing ability when compared to the usual lab XPS. Our results confirm the high quality of the heterostructure with abrupt interfaces, no interdiffusion, and good control of the doping with an effective InAlAs spacer blocking Zn diffusion in InP.
We investigate the chemical composition of InP/GaAs0.51Sb0.49/InP heterostructures, focusing on a precise location of the major elements to search for potential Sb segregation and As diffusion. Angle-resolved x-ray photoelectron spectroscopy demonstrates approximately 1.2 ± 0.1 at. % antimony segregation in the top InP layer, along with the absence of arsenic diffusion. Hard x-ray photoelectron spectroscopy (HAXPES) is also implemented to get complementary information about the top InP/GaAs0.51Sb0.49 interface. The theoretical modeling of HAXPES intensity ratios is compared with data collected at various angles, highlighting Sb segregation and no As diffusion through the top InP layer. Time-of-flight secondary ion mass spectrometry data confirm the effective presence of Sb all along this InP layer and negligible As diffusion. It shows also that this Sb segregation during growth does not affect the composition of the GaAsSb critical layer.
Le travail proposé dans le cadre de cette thèse a eu comme objectif d'optimiser les paramètres de croissance des nanostructures III-N/III-V (GaN/GaAs, InN/InP, InN/GaAs) par la technique de croissance d'épitaxie de gouttelettes DE (Droplet Epitaxy). A cette fin, nous avons décrit la cinétique et la thermodynamique de croissance de ces nanostructures par modélisations théoriques en utilisant la Cinétique Monte Carlo (KMC) et la théorie de la fonctionnelle de la densité DFT (Density Functional Theory). Les structures ont été caractérisées physico-chimiquement in-situ par spectroscopie de photoélectrons X (XPS). Les analyses morphologiques par microscopies électroniques (MEB et HRTEM) et par microscopies à champ proche ont complété les résultats en permettant une description précise des phénomènes entrant en jeu lors des phases de dépôt métallique puis de nitruration. Nous avons pu ainsi définir les paramètres de conception propres à chaque type de nanostructures.