14 December 2018 in Corrosion Reviews
In many industries and processes, heat exchangers are of vital importance as they are used to transfer heat from one fluid to another. These fluids can be corrosive to heat exchangers, which are usually made of metallic materials. This paper illustrates that corrosion is an important problem in the operation of heat exchangers in many environments, for which no straightforward answer exists. Corrosion failures of heat exchangers are common, and corrosion often involves high maintenance or repair costs. In this review, an overview is given of what is known on corrosion in heat exchangers. The different types of corrosion encountered in heat exchangers and the susceptible places in the devices are discussed first. This is combined with an overview of failure analyses for each type of corrosion. Next, the effect of heat transfer on corrosion and the influence of corrosion on the thermohydraulic performances are discussed. Finally, the prevention and control of corrosion is tackled. Prevention goes from general design considerations and operation guidelines to the use of cathodic and anodic protection.
6 May 2014 in IEEE Transactions on Sustainable Energy
This paper discusses the charging of plug-in hybrid electric vehicles (PHEVs) in an existing office building microgrid equipped with a photovoltaic (PV) system and a combined heat and power (CHP) unit. Different charging strategies and charging power ratings for workplace charging are examined for their grid impact and their impact on the self-consumption of the locally generated electricity. The grid impact can be significantly reduced by using strategies that require limited future knowledge of the EV mobility behavior and limited communication infrastructure. These strategies allow a high number of EVs to be charged at an office building, even with a limited number of charging spots, due to the large standstill times.
30 October 2013 in IEEE Transactions on Sustainable Energy
This paper discusses the charging of multiple plug-in hybrid electric vehicles (PHEVs) in an apartment building, equipped with a photovoltaic (PV) system. Different charging strategies and charging power ratings are examined, which are assessed in terms of their grid impact, the self-consumption of local electricity generation, and the electric driving range. The impact of a residential building, which incorporates electric vehicle (EV) charging, on the distribution grid can be significantly reduced by using simple EV charging strategies. These strategies include complementing night-time with day-time charging, peak shaving at vehicle level, and charging the surplus of local generation. Effective results are obtained using only the knowledge of the present battery state of charge, next departure time, and the instantaneous local generation surplus. The simultaneity of the EV charging and the PV production increases. The increase in electric driving range is negligible for three-phase charging.
1 January 2015 in Energy Conversion and Management
1 January 2018 in Energy and Buildings