This letter presents an analysis of the toroidal-core energy (TCE) harvester that draws power from the near-field of a UHF leaky-feeder communication cable to supply ultra-low-power IoT sensor nodes deployed inside underground tunnels. The NiZn ferrite toroid (Ri = 38 mm, R0 = 63 mm, height = 25 mm, μi= 700, N = 7 turns) is coupled inductively to an RLK78-50JFNA leaky-feeder cable resonating at f0 = 416.5 MHz, the center of the 411–422 MHz operating sub-band. Full-wave simulations performed in CST Microwave Studio are experimentally validated with a 24 W UHF transmitter that establishes an in-tunnel near-field along the cable, and the harvester delivers VAC = 6.83 V and IAC = 71.4 mA at resonance under the 1 W simulation reference power, corresponding to an AC power-conversion efficiency of 48.8%. A two-stage HSMS-285P Schottky voltage doubler followed by a commercial RFD199A-PCB RF-DC converter regulates the output to 4.7 V DC, sufficient to power low-duty-cycle sensor nodes. A linear post-processing methodology is introduced to reconcile CST's 1 W port-power normalization with the parametric input-power sweep required for experimental verification, enabling rapid design exploration without re-running the solver. To the best of the authors’ knowledge, the proposed harvester is the first reported device to exploit the UHF leakage from a slotted radiating coaxial cable as a stationary power source for in-tunnel IoT applications.