13 October 2016 in Medical & Biological Engineering & Computing
Traumatic brain injury is the leading cause of death and severe disability for young people and a major public health problem for elderly. Many patients with intracranial bleeding are treated too late, because they initially show no symptoms of severe injury and are not transported to a trauma center. There is a need for a method to detect intracranial bleedings in the prehospital setting. In this study, we investigate whether broadband microwave technology (MWT) in conjunction with a diagnostic algorithm can detect subdural hematoma (SDH). A human cranium phantom and numerical simulations of SDH are used. Four phantoms with SDH 0, 40, 70 and 110 mL are measured with a MWT instrument. The simulated dataset consists of 1500 observations. Classification accuracy is assessed using fivefold cross-validation, and a validation dataset never used for training. The total accuracy is 100 and 82–96 % for phantom measurements and simulated data, respectively. Sensitivity and specificity for bleeding detection were 100 and 96 %, respectively, for the simulated data. SDH of different sizes is differentiated. The classifier requires training dataset size in order of 150 observations per class to achieve high accuracy. We conclude that the results indicate that MWT can detect and estimate the size of SDH. This is promising for developing MWT to be used for prehospital diagnosis of intracranial bleedings.
1 September 2014 in Measurement
7 June 2017 in IEEE Transactions on Microwave Theory and Techniques
Based on compressed sensing and microwave measurements, we present a procedure for the detection and positioning of dielectric objects inside a metal enclosure, where the number of objects is unknown but assumed to be limited. The formulation features a convex quadratic optimization problem with 1-norm regularization, which allows for rapid detection and positioning given a precomputed dictionary. The dictionary consists of the scattering parameters computed from a single scattering object placed at the grid points of a structured grid that covers the entire measurement region. We test our method experimentally in a microwave measurement system that features a measurement region with a diameter of 11.6 cm. The measurement region is encircled by six aperture antennas, where each aperture is the end-opening of a rectangular waveguide operated from 2.7 to 4.2 GHz. We use acrylic-glass cylinders of radius 5.2 mm as scatterers and find that the compressed sensing method can correctly detect at least up to five scatterers with an average positioning accuracy of 3 mm. In addition, we investigate the performance of the method with respect to scarcity of data, where we omit scattering parameters or frequency points.
1 September 2016 in Journal of Computational Physics
We present a higher-order brick-tetrahedron hybrid method for Maxwell's equations in time domain. Brick-shaped elements are used for large homogeneous parts of the computational domain, where we exploit mass-lumping and explicit time-stepping. In regions with complex geometry, we use an unstructured mesh of tetrahedrons that share an interface with the brick-shaped elements and, at the interface, tangential continuity of the electric field is imposed in the weak sense by means of Nitsche's method. Implicit time-stepping is used for the tetrahedrons together with the interface. For cavity resonators, the hybrid method reproduces the lowest non-zero eigenvalues with correct multiplicity and, for geometries without field singularities from sharp corners or edges, the numerical eigenvalues converge towards the analytical result with an error that is approximately proportional to h(2p), where his the cell size and pis the polynomial order of the elements. For a rectangular waveguide, a layer of tetrahedrons embedded in a grid of brick-shaped elements yields a low reflection coefficient that scales approximately as h(2p). Finally, we demonstrate hybrid time-stepping for a lossless closed cavity resonator, where the time-domain response is computed for 300,000 time steps without any signs of instabilities. (C) 2016 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license.
1 January 2019 in Progress In Electromagnetics Research B
We present an optimization procedure for wireless power transfer (WPT) applications and test it numerically for a WPT system design with four resonant circuits that are magnetically coupled by coaxial coils in air, where the magnetic field problem is represented by a fully populated inductance matrix that includes all magnetic interactions that occur between the coils. The magnetically coupled resonators are fed by a square-wave voltage generator and loaded by a rectifier followed by a smoothing filter and a battery. We compute Pareto fronts associated with a multi-objective optimization problem that contrasts: 1) the system efficiency; and 2) the power delivered to the battery. The optimization problem is constrained in terms of: 1) the physical construction of the system and its components; 2) the root-mean-square values of the currents and voltages in the circuit; and 3) bounds on the overtones of the currents in the coils in order assure that the WPT system mainly generates magnetic fields at the operating frequency. We present optimized results for transfer distances from 0.8 to 1.6 times the largest coil radius with a maximum power transfer from 4 kW to 9 kW at 85 kHz, which is achieved at an efficiency larger than 90%.