An electromagnetic energy harvester (EMEH) is proposed in this paper which is designed considering the power requirement of an ice removing device used to remove the ice and snow from power transmission lines. This paper addresses the influence of the material characteristic of the magnetic core to achieve the required power. Three different core materials, namely, silicon (Si) steel, nickel (Ni) steel, and nano crystalline HTX-012 core are used to design single and dual core models with three different airgaps using 3-D finite-element analysis and are compared in terms of the induced voltage, saturation flux density, relative permeability, and core losses. Comparison shows that the EMEH with Si-HTX-012 core and stepped airgap can produce the highest induced voltage.
This paper proposes two novel airgap profile designs and distributed airgap arrangement scheme for reduction of winding and thermal losses in high frequency current transformer (HFCT) sensors. The novel airgap profiles namely, zigzag and stepped airgap profiles are proposed to reduce fringing flux around the winding conductors. Moreover, to decrease winding and thermal losses, distributed airgap arrangement scheme is proposed. In distributed airgap arrangement, a single airgap is distributed to multiple equidistant smaller airgaps around the magnetic core. The analysis is performed using 3D finite element analysis (FEA) method. The 3D-finite element analysis results confirm that the HFCT sensors with the proposed airgap profiles and arrangement scheme can reduce winding and thermal losses ensuring high performance for HFCT sensors.