2 May 2019 in International Journal of Chemical Engineering
Ammonium phosphate fire-extinguishing agents are one of the best substitutes for halon in many powder media. Here, 11 μm median diameter ammonium phosphate ultrafine dry powder was used as a fire-extinguishing medium. The fire-extinguishing performance of ultrafine powder under different pressures was studied by analyzing fire-extinguishing time, amount of extinguishing agent, and temperature during the fire-extinguishing process. The results show that the fire-extinguishing performance of the ultrafine powder is improved with increasing injection pressure. Finally, we used FDS software for fire simulation to study the influence of injection pressure on the extinguishing agent. The results show that the extinguishing time is shortened with increasing injection pressure. From 0.2 MPa to 1.0 MPa, the extinguishing time decreases from 34 seconds to 4 seconds.
1 January 2018 in Advances in Civil Engineering
Because of increasing energy consumption and severe air pollution in China, solar photovoltaic power generation plants are being deployed rapidly. Owing to various factors such as technology, construction, and imperfection of construction standards, solar photovoltaic systems have certain fire risks. This paper focuses on the fire risks of building‐integrated solar photovoltaic buildings, as well as temperature and heat flow density near a photovoltaic system in a fire. Based on FDS simulation results, the influence of different building fires on photovoltaic systems is analysed. It is found that the influence of fire on photovoltaic systems installed on a building with a flat roof is stronger than that on a system installed on a building with a sloping roof; the influence of fire on a photovoltaic system installed on a building with external wall thermal insulation is stronger than that on a system installed on a building without such insulation; and in the presence of a skylight, a photovoltaic system installed on a building with a sloping roof is more dangerous.
5 August 2019 in RSC Advances
Although nanoparticles, nanorods, and nanosheets of α-Fe2O3 on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe2O3 nanomaterials with more sophisticated compositions and structures on the graphene sheets.
6 November 2017 in Advances in Civil Engineering
Congestion is the major cause of crowd stampede-trampling and crushing incidents. To alleviate the phenomenon of congestion in the process of evacuation, theory of split-flow wall is put forward to optimize the evacuation and the principle of it is analyzed. Based on the occupant evacuation software of buildingEXODUS, the set parameters of the split-flow wall are studied, and we find that the best range of shunt wall length is 1.5–2 times the export width and the best position of the split-flow wall is 0.5 to 0.75 times the export width far from the exit. Shunt wall can effectively alleviate and even eliminate the congestion in the process of evacuation and will not affect safe evacuation when crowd density is low.