Heavy metals pollution is one of today's concerns of human societies. In the present project, mercapto functionalized silica aerogel was used to remove Zn2+ and Mn2+ from aqueous solution. The simultaneous adsorption of these ions has also studied. The kinetics and thermodynamics of the adsorption process as well as various isotherm models have been investigated. The results show that the adsorption process is spontaneous and favorable. The adsorption followed the Langmuir model and the maximum adsorption capacity for manganese and zinc was 1.38 and 1.33 mmol/lit, respectively. The kinetics of the adsorption process corresponds to the pseudo-second order equation. Intra particle diffusion model illustrated a greater affinity to the zinc ion, which confirmed by simultaneous adsorption results.
The purpose of this work was to model and optimise the preparation of silica aerogel using low‐cost material and modified sol–gel process. A central composite design was employed to optimise the synthesis factors. Among all factors discussed in literatures, silica concentration, gelation time and hydrophobic agent amount were the most efficacious ones. All experiments were performed at the same conditions, but the elected factors were varied in five levels. The response (density of silica aerogel) was fitted by quadratic regression model to find the optimal condition. Computation results showed that the minimum density of silica aerogel was achieved at silica concentration of 4.12 g/l, acid amount of 14.46 ml and trimethylchlorosilane (TMCS) consumption of 10.39 ml. The best density of silica aerogel was 0.078915 g/cm 3 and the specific surface area determined by Brunauer–Emmett–Teller (BET) analysis was 780 m 2 /g.