Au nanoparticles with a mean diameter of 20 nm with a coverage of ∼20% of the surface were distributed on a Si wafer surface and studied both before and after being annealed (at 100 and 300 °C). The two types of samples were analyzed using secondary ion mass spectroscopy (SIMS) with Bi3+ clusters as the primary ions combined with surface etching using Ar1000+ clusters. We observed a substantial difference in the SIMS spectra combined with a relatively short sputtering time of Ar1000+. In the nonannealed samples, bare Au cluster cations and Si+ were observed in the SIMS spectra; AuSi+ clusters were also observed in the annealed samples. These results indicate Au-silicide formation at a part of the periphery of the Au nanoparticles upon annealing. We suggest that SIMS experiments using cluster ions such as Bi3+ can not only be used for surface elemental analyses but also provide information on local chemical environments of elements on the surface. This is an important issue in heterogeneous catalysis (e.g., strong metal–support interactions). We also advise that one should be careful interpreting the SIMS data combined with a longer Ar1000+ sputtering time because this can deteriorate the surfaces from their original structures.
Wet-chemically synthesized Au nanoparticles were deposited on Si wafer surfaces, and the secondary ions mass spectra (SIMS) from these samples were collected using Bi3+ with an energy of 30 keV as the primary ions. In the SIMS, Au cluster cations with a well-known, even-odd alteration pattern in the signal intensity were observed. We also performed depth profile SIMS analyses, i.e., etching the surface using an Ar gas cluster ion beam (GCIB), and a subsequent Bi3+ SIMS analysis was repetitively performed. Here, two different etching conditions (Ar1600 clusters of 10 keV energy or Ar1000 of 2.5 keV denoted as “harsh” or “soft” etching conditions, respectively) were used. Etching under harsh conditions induced emission of the Au-Si binary cluster cations in the SIMS spectra of the Bi3+ primary ions. The formation of binary cluster cations can be induced by either fragmentation of Au nanoparticles or alloying of Au and Si, increasing Au-Si coordination on the sample surface during harsh GCIB etching. Alternatively, use of the soft GCIB etching conditions resulted in exclusive emission of pure Au cluster cations with nearly no Au-Si cluster cation formation. Depth profile analyses of the Bi3+ SIMS combined with soft GCIB etching can be useful for studying the chemical environments of atoms at the surface without altering the original interface structure during etching.
The application of a Ga-liquid metal ion beam (Ga-LMIB) for surface modification is reported. Ga-LMIB treatment on the glass surface resulted in the implantation of Ga ions and the formation of sub-micrometer mounds. The glass surface hydrophobicity was also found to be enhanced as a result of the Ga-LMIB treatment; additionally, a photocatalytic activity that promoted organic dye decomposition was observed. Ga-LMIB application can be considered to be a new surface modification strategy for the construction of locally hydrophobic and photocatalytic surfaces.