14 January 2021 in IEEE Internet of Things Journal
Recently, Internet of Things (IoT) has attracted much interest in its wide applications such as smart healthcare, home automation, transportation, and smart city. In these IoT-based systems, Wireless Sensor Networks (WSNs) are highly used to gather information needed by smart environments. However, due to huge heterogeneous data coming from different sensing devices, IoT-enabled WSNs faces different challenges like high communication delay, low throughput, and poor network lifetime. In this paper, a Deep Reinforcement Learning (DRL) based intelligent routing scheme is proposed for IoT-enabled WSNs that significantly reduce delay and increase network lifetime. The proposed algorithm divides the whole network into different unequal clusters depending on the current data load present in the sensor node that significantly prevent immature death of the network. An extensive experiment on the proposed algorithm is performed using ns3. The experimental results are compared with the state-of-the-art algorithms to demonstrate the efficiency of the proposed scheme in terms of the number of alive nodes, packet delivery, energy efficiency, and communication delay in the network.
6 September 2022 in IEEE Transactions on Industrial Informatics
Safety is a major concern for Industrial 4.0 where different physical parameters are monitored for avoiding uncertain events in the industry. In industries, natural calamities like fire and leakage of harmful gases can cause huge damage to life and property. An Industrial Internet of Things (IIoT) is used to monitor such natural calamities and take timely prompt actions. However, sensors in the IIoT are vulnerable to failures due to energy depletion and hardware malfunctioning. It significantly reduces the reliability of the network. This paper proposes an intelligent fault-tolerant scheme where different faults within the wireless sensor network-assisted IIoT such as node fault and link fault are detected and tolerated in a timely manner. It significantly improves the reliability of the network. Extensive simulations show the out-performance of the proposed scheme in terms of average packet delivery, energy consumption, throughput, network lifetime, communication delay, and recovery speed.
7 December 2021 in IEEE Transactions on Industrial Informatics
Nowadays, the demand for the Industrial Internet of Things (IIoT) technology has increased immensely in various fields, such as the agriculture industry, smart mines, smart factories, healthcare industry, etc. Industrial wireless sensor networks (IWSNs) act as a backbone of any IIoT system by forming a network of heterogeneous sensors. In IWSNs, the fault occurrence probability is more due to continuous exposure to harsh environments. Furthermore, the presence of obstacles creates an extra burden in fault detection. In this article, the proposed scheme presents an optimal fault diagnostic point selection mechanism that significantly reduces fault detection latency and energy consumption. Multiple intelligent mobile fault detectors effectively avoid obstacles during the fault detection process that significantly improves fault detection accuracy (FDA). Extensive simulations and a testbed experiment demonstrate the effectiveness of the proposed scheme in terms of FDA, false alarm rate, false positive rate, F1-score, energy consumption, and network lifetime.
27 January 2022 in IEEE Sensors Journal
Recent years have seen an explosion in the demand for the Internet of Things (IoT). IoT makes any physical object smart by providing sensing capability. The physical objects are embedded with sensors that form a network of sensors. However, sensors are vulnerable to faults due to energy depletion, software failures, and hardware failures. The existing fault detection schemes put huge computational overhead on the battery-limited and low computational capacity sensor nodes that are subject to the premature death of the sensor nodes. Also, they suffer from poor fault detection accuracy and huge false alarm rate that significantly reduce the overall performance of the networks. In this paper, an energy-aware intelligent fault detection scheme is proposed for IoT-enabled wireless sensor networks that significantly improve fault detection accuracy and reduce false alarm rate. A novel 3-Tier hard fault detection mechanism is used for detecting hardware unit faults of the sensor nodes. Furthermore, an optimized deep learning mechanism is used for various soft fault detection that prevents premature death of sensor nodes. The paper mathematically analyses the proposed scheme in terms of energy consumption, time complexity, and message complexity. Extensive simulations show the enhanced performance of the proposed scheme compared with the state-of-the-art algorithms in terms of fault detection accuracy, false alarm rate, false-positive rate, energy consumption, and network lifetime.
1 October 2024 in IEEE Transactions on Vehicular Technology
In the current era, the Internet of Things (IoT) is an emerging technology that finds its application in the smart agriculture, smart cities, healthcare, etc. The backbone of these IoT-based applications is Wireless Sensor Networks (WSNs). The sensors in the WSNs face various challenges such as hardware failure and limited battery power. This causes network partitioning problems. Also, limited battery power causes energy-hole issues. In this paper, an Artificial Intelligence (AI)-based rendezvous points selection and rotation mechanism is proposed that provides green and fault-tolerant data collection in sensor networks. Also, an intelligent mobile sink-based data collection scheduling scheme is proposed that resolves energy holes and network partitioning issues. The simulations and testbed results demonstrate the efficiency of the proposed scheme.
31 May 2022 in IEEE Transactions on Green Communications and Networking
In the modern era, the Internet of Things (IoT) plays a vital role in connecting physical objects to the Internet. Therefore, an IoT technology can monitor and control any physical object from remote locations. In IoT-based systems, Wireless Sensor Network (WSN) is used to monitor a large number of heterogeneous physical objects. The IoT-enabled WSNs suffer from congestion problems that significantly reduce the network lifetime and performance of the network. This paper present a green hybrid congestion control mechanism for IoT-enabled WSNs. It uses an unequal clustering mechanism which saves the energy of battery-limited sensor nodes and resolves energy hole issues. Furthermore, a novel two-class priority-based congestion avoidance mechanism is proposed which significantly reduces communication delay. Extensive simulations and real-life experiments are performed to demonstrate the effectiveness of the proposed scheme. Experimental result shows that the proposed scheme outperforms the state-of-the-art algorithms in terms of network lifetime, successful packet delivery, average throughput, and other parameters. Furthermore, the proposed scheme is also tested in a real testbed that demonstrates its effectiveness for disaster management in smart city applications.