1 February 2014 in Construction and Building Materials
1 July 2016 in KSCE Journal of Civil Engineering
In recent years, ground vibration has become a popular research topic due to the growing construction close to vibration sources and the attentiveness of people about living conditions. Thus, vibrations caused by the passage of the train near buildings play an important role. In prediction of train-induced vibrations, many experimental and theoretical methods have been proposed. In order to study the vibration near the railway at Qaemshahr, a 2D finite element analysis employed for modeling of the train movement and its effect on the adjacent building. The validation of the numerical model was done by the high-speed train running measurements. The results show that the vibration level decreases by increasing the track centerline to building distance and decreasing train speed. The frequency of vibration up to 12 Hz was present in the incident wave field and the dominating part of the frequency content was between 2.5 and 5.5 Hz. The building foundation bending moment variations caused by train-induced vibrations was negligible. The track centerline to building edge distance of 18 m was seemed to be an acceptable value to reduce the annoyance and environmental effects caused by train-induced vibrations.
16 April 2019 in International Journal of Pavement Engineering
Reflective cracking is a frequent type of distress in asphalt concrete (AC) pavements that decreases pavement service life in a newly constructed AC overlay. In this study, natural zeolite and hydrated lime were added to crumb rubber modified (CRM) asphalt binder in order to assess their effects on reducing propagation of reflective cracks in composite pavements. CRM asphalt binder containing these additives was used in both AC overlay and sand asphalt interlayer to investigate crack propagation in the composite specimen under dynamic cyclic loading. The results show that asphalt interlayer modification is more effective than AC overlay modification (using CRM binders containing additives) in controlling reflective cracks. In other words, sand asphalt interlayer modification is more capable of absorbing the energy of crack propagation and, consequently, delaying the crack propagation. The results also indicated that simultaneous modification of both the interlayer and overlay significantly decreases reflective cracking potential. With respect to the significant role of additive type in crack propagation delaying, the results show that CRM binders containing natural zeolite are more efficient in crack mitigation compared to CRM binders containing hydrated lime.
27 July 2020 in Journal of Thermoplastic Composite Materials
Adhesion of composite pavement plays a significant role in the durability and maintenance of this type of pavement. The present research aims to assess the bonding and fatigue performance of rigid–flexible composite pavements through laboratory testing at different tack coat application rates. Three types of modified bitumen, crumb rubber-modified bitumen containing hydrated lime (CR/HL), crumb rubber-modified bitumen containing natural zeolite (CR/NZ), and crumb rubber-modified bitumen (CRMB), were selected as the tack coat. Shear fatigue and direct shear tests were utilized to assess the bonding properties of tack coats. The study also examines the behavior of modified bitumen by examining its viscosity, rheological properties, and performance grade. The results show that CR/NZ exhibits better performance in rheological behavior and at various temperatures compared to CR/HL and CRMB. Also, depending on the type of tack coat, shear strength tests show a range of 0.6–0.9 l m−2 as the optimal tack coat dosage. Finally, based on the optimal tack coat, shear strength ratings for various bitumen types may be classified as CRMB < CR/HL < CR/NZ.