School of Materials and Energy Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing 400715 P. R. China
Auto-generated profile, based on publicly available information
Kai Zhang
School of Materials and Energy Chongqing Key Laboratory of Soft‐Matter Material Chemistry and Function Manufacturing Southwest University Chongqing 400715 P. R. China
Electrically conductive segregated networks were built in poly(L-lactide)/multi-walled carbon nanotube (PLLA/MWCNT) nanocomposites without sacrificing their mechanical properties via simply choosing two different PLLA polymers with different viscosities and crystallinities. First, the MWCNTs were dispersed in PLLA with low viscosity and crystallinity (L-PLLA) to obtain the L-PLANT phase. Second, the PLLA particles with high viscosity and crystallinity (H-PLLA) were well coated with the L-PLANT phase at 140 °C which was below the melting temperature of H-PLLA. Finally, the coated H-PLLA particles were compressed above the melting temperature of H-PLLA to form the PLLA/MWCNT nanocomposites with segregated structures. The morphological observation showed the successful location of MWCNTs in the continuous L-PLLA phase, resulting in an ultralow percolation threshold of 0.019 vol% MWCNTs. The electrical conductivity and the electromagnetic interference (EMI) shielding effectiveness (SE) of the composites with the segregated structure are 25 S m−1 and ∼30 dB, showing three orders and 36% higher than that of the samples with a random distribution of MWCNTs with 0.8 vol% of MWCNT loading, respectively. High-performance electromagnetic interference (EMI) shielding was also observed mainly dependent on the highly efficient absorption shielding, which can be achieved by the densely continuous MWCNT networks and the abundant interfaces induced by the segregated structures. Furthermore, the composites with segregated structures not only showed higher Young's modulus and tensile strength than the corresponding conventional composites, but also maintained high elongation at break because of the continuous and dense MWCNT networks induced by the segregated structures and the high interfacial interaction between H-PLLA and L-PLLA.
Formation of highly conductive networks is essential for achieving flexible conductive polymer composites (CPCs) with high force sensitivity and high electrical conductivity. In this study, self-segregated structures were constructed in polydimethylsiloxane/multi-wall carbon nanotube (PDMS/MWCNT) nanocomposites, which then exhibited high piezoresistive sensitivity and low percolation threshold without sacrificing their mechanical properties. First, PDMS was cured and pulverized into 40–60 mesh-sized particles (with the size range of 250–425 μm) as an optimum self-segregated phase to improve the subsequent electrical conductivity. Then, the uncured PDMS/MWCNT base together with the curing agent was mixed with the abovementioned PDMS particles, serving as the segregated phase. Finally, the mixture was cured again to form the PDMS/MWCNT nanocomposites with self-segregated structures. The morphological evaluation indicated that MWCNTs were located in the second cured three-dimensional (3D) continuous PDMS phase, resulting in an ultralow percolation threshold of 0.003 vol% MWCNTs. The nanocomposites with self-segregated structures with 0.2 vol% MWCNTs achieved a high electrical conductivity of 0.003 S m−1, whereas only 4.87 × 10−10 S m−1 was achieved for the conventional samples with 0.2 vol% MWCNTs. The gauge factor GF of the self-segregated samples was 7.4-fold that of the conventional samples at 30% compression strain. Furthermore, the self-segregated samples also showed higher compression modulus and strength as compared to the conventional samples. These enhanced properties were attributed to the construction of 3D self-segregated structures, concentrated distribution of MWCNTs, and strong interfacial interaction between the segregated phase and the continuous phase with chemical bonds formed during the second curing process. These self-segregated structures provide a new insight into the fabrication of elastomers with high electrical conductivity and piezoresistive sensitivity for flexible force-sensitive materials.
17 February 2017 in Journal of Materials Chemistry C
Morphological control of conductive networks in conductive polymer composites has been demonstrated to efficiently improve their electrical performance. Here, morphological regulation used for the formation of conductive networks occurs in poly(L-lactide)/poly(ε-caprolactone) (PLLA/PCL) blends when stereocomplex crystallites (SCs) are formed in the PLLA phase. The SCs formed during the melt-processing increase the viscosity and elasticity of the PLLA phase, which makes the PLLA domains shrink and the PCL phase becomes continuous from the previously dispersed phase. As a result, for PLLA/PCL/multi-walled carbon nanotube (MWCNT) nanocomposites, the MWCNTs prefer to disperse in the PCL phase via morphological regulation. The electrical conductivity and the electromagnetic interference (EMI) shielding effectiveness (SE) of the PLLA/PCL/MWCNT nanocomposites can be abruptly increased and attributed to the simultaneous organization of conductive paths when the continuous PCL phase develops. For example, the electrical conductivity and the EMI SE of the PLLA/PCL/MWCNT nanocomposites increased from 2.1 × 10−12 S m−1 and 5.3–8.6 dB to 0.012 S m−1 and ∼17 dB, respectively, with 0.8 wt% MWCNTs when adding 20 wt% poly(D-lactide) (PDLA) to the PLLA phase. Furthermore, the percolation threshold of the nanocomposites was reduced from 0.13 to 0.017 vol% by adding 20 wt% poly(D-lactide) (PDLA) to the PLLA phase.