Friction surfacing is an localized surface modification process of depositing consumable materials over substrate. FS, utilizes FSW technology allows joining of materials while avoiding the brittle intermetallic formations, involving temperatures below melting point and producing fine grained structure, results in exhibiting bond integrity and enhanced surface properties, reducing the costs associated with energy consumption and consumables. The process is used for corrosion and wear resistant coatings and for reclamation of worn engineering components and for coating components using dissimilar materials. This review presents the essentials of FS, parameters used, performance features of this technique. This describes the influence of the process parameters on surface properties of the surface composites produced and evaluated of the different materials. The FS is compared with other coating processes, and some of the applications are emphasized. The paper also discusses on few trails of FS made by the authors and the results of which is presented.
The contemporary concern in worldwide power scenario and consumption rate is frightening significantly at a marvelous amount of population, and it originates a very high augment in the electrical energy area. The all-embracing attraction and manufacture of fossil energy is the chief reason in the ecological issues. Due to these relic fuels, the ecological resources get exhausted, and it results in climatic change. Due to these negative aspects, every country puts effort to bring the energy efficiency high with the help of renewable energy. Presently, the solar energy donation worldwide decreases. Contrarily, solar energy contribution to the global energy is highly contrary to nonconventional energy resources. But there is a progress in power generation, and it plays a vital role in solar photovoltaic generation. Gallium nitride and silicon carbide power semiconductors will emerge to bring the efficiency high in the photovoltaic technology. In this work, we will converse about how to increase the efficiency by using gallium nitride.
AA7068/ZnO composites were synthesized by powder metallurgy technique with different weight percentages of ZnO (5%, 10%, and 15%) along with as sintered AA7068. A low pressure of 318 MPa was applied for compaction and sintered at a temperature of 560°C for one hour. Microstructural behavior was studied using optical microscopy. Vickers microhardness test was conducted to find out the microhardness. Using pin-on-disc wear-tester experiments were conducted with a velocity of 1.2 m/s over a sliding distance of 2.5 km of load 5 N. Scanning Electron Microscopy (SEM) analysis was carried out to investigate the worn surface. Experimental results showed that the Vickers microhardness number have been increased to 66 by addition of 15% ZnO, which was double that of the matrix material. Wear experiments revealed improved wear resistance by the addition of ZnO particles. SEM analysis exposed that abrasion, delamination and oxidation were the predominant wear mechanisms for the matrix material and AA7068-5% ZnO composite and adhesion and oxidation for composites reinforced with 10% and 15% ZnO particles.