Conventionally, the evaluation of fracture surface roughness in brittle geomaterials, such as concrete and rock, has been based on the measurement and analysis of two-dimensional profiles rather than three-dimensional (3D) surfaces. The primary reason for doing so was the lack of tools capable of making 3D measurements. However, in recent years, several optical and mechanical measurement tools have become available, which are capable of quickly and accurately producing high resolution point clouds defining 3D surfaces. This paper provides a methodology for evaluating the surface roughness and roughness anisotropy using these 3D surface measurements. The methodology is presented step-by-step to allow others to easily adopt and implement the process to analyze their own surface measurement data. The methodology is demonstrated by digitizing a series of concrete fracture surfaces and comparing the estimated 3D roughness parameters with qualitative observations and estimates of the well-known roughness coefficient, Rs.
21 August 2012 in Rock Mechanics and Rock Engineering
This study investigates the influence of microscale heterogeneity and microcracks on the failure behavior and mechanical response of a crystalline rock. The thin section analysis for obtaining the microcrack density is presented. Using micro X‐ray computed tomography (μCT) scanning of failed laboratory specimens, the influence of heterogeneity and, in particular, biotite grains on the brittle fracture of the specimens is discussed and various failure patterns are characterized. Three groups of numerical simulations are presented, which demonstrate the role of microcracks and the influence of μCT‐based and stochastically generated phase distributions. The mechanical response, stress distribution, and fracturing process obtained by the numerical simulations are also discussed. The simulation results illustrate that heterogeneity and microcracks should be considered to accurately predict the tensile strength and failure behavior of the sample.