17 January 2020 in Nature Communications
The achievement of high growth rates in YBa2Cu3O7 epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s−1) and high critical current densities (5 MA cm−2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process.
18 September 2022 in Advanced Science
Transient liquid assisted growth (TLAG) is an ultrafast non‐equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X‐ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2Cu3O7−x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2–2.6 MA cm−2 at 77 K and growth rates between 100–2000 nm s−1 are reached. These growth rates are 1.5–3 orders of magnitude higher than those of conventional methods.
1 August 2018 in Journal of Analytical and Applied Pyrolysis
1 June 2019 in Journal of Analytical and Applied Pyrolysis
1 August 2019 in Journal of Analytical and Applied Pyrolysis
16 June 2020 in The Journal of Physical Chemistry C