Peter Zsabka

Peter Zsabka

Auto-generated profile, based on publicly available information

Peter Zsabka

Belgian Nuclear Research Center (SCK·CEN), Institute for Nuclear Materials Science, Mol, Belgium

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2018 in Solvent Extraction and Ion Exchange
Verified
Journal Article
Closed access
PZPeter Zsabka
Peter Zsabka
KHKaren Van Hecke
Karen Van Hecke
LALesley Adriaensen
Lesley Adriaensen
Andreas WildenAndreas Wilden
Andreas Wilden
GMGiuseppe Modolo
Giuseppe Modolo
TCThomas Cardinaels
Thomas Cardinaels
The extraction behavior of americium(III), curium(III) (minor actinides, MA), fission products (lanthanides (Ln(III)), Mo, Ru, Pd, and Rh), and corrosion products (Zr and Fe) was studied in batch solvent extraction experiments using the room-temperature ionic liquid (IL) Aliquat-336 nitrate ([A336][NO3]) and a solvent composed of 0.05 M TODGA in [A336][NO3]. From acidic, dilute Ln(III) feed solutions, [A336][NO3] extracts nitric acid (D ≈ 0.5) and partially An(III) as well as Ln(III) (DAm = 0.02–0.1, DEu, and DCm = 0.01–0.04). The influence of the acid concentrations and kinetics on extraction and back-extraction of Ln(III) and An(III) by 0.05 M TODGA in [A336][NO3] was investigated using radiotracer-spiked dilute Ln(III) feed solutions. With the solvent composed of 0.05 M TODGA in [A336][NO3], DAn and DLn increase as a function of aqueous feed acidity. In the case of a spiked, simulated highly active raffinate (HAR) feed solution, [A336][NO3] extracts La(III) (DLa = 1.36), Ru (DRu = 1.64), and Pd (DPd = 38), while the distribution ratios of other Ln(III) and An(III) were lower than unity. The solvent composed of 0.05 M TODGA in [A336][NO3] co-extracted from HAR Zr(IV) (DZr> 300), Pd (DPd = 206), and Ln(III) (DLn> 1, except for Nd(III)), but An(III) were retained in the aqueous phase. The interference caused by the co-extraction of several fission (Zr, Pd, Ru, and Mo) and corrosion (Zr) products, which are present in the HAR at relatively high concentrations, was suppressed using masking agents (oxalic acid and trans-1,2-diaminocyclohexane-N,N,N’,N’-tetraacetic acid, CDTA). In the case of the actual HAR solution, the kinetics were found to be faster compared with the extraction from dilute Ln(III) feed solutions, possibly due to the different aqueous speciation of the Ln(III) and An(III).

20 January 2020 in Solvent Extraction and Ion Exchange
Verified
Journal Article
Closed access
PZPeter Zsabka
Peter Zsabka
KHKaren Van Hecke
Karen Van Hecke
Andreas WildenAndreas Wilden
Andreas Wilden
GMGiuseppe Modolo
Giuseppe Modolo
MHMichelle Hupert
Michelle Hupert
TCThomas Cardinaels
Thomas Cardinaels
Radiolytic stability of the extractants N,N,N’,N’-tetraoctyl diglycolamide (TODGA) and 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline (CyMe4BTPhen) in the ionic liquid tri-n-octylmethylammonium nitrate ([N1888][NO3]) was studied via the combination of a steady-state irradiation by cobalt-60 gamma-radiation, followed by solvent extraction and identification of radiolysis products by High-Performance Liquid Chromatography coupled to Electro Spray Ionisation Mass Spectrometry (HPLC-ESI-MS). The observed trend for the distribution ratios of trivalent minor actinides and Eu(III) showed a decrease as a function of absorbed dose in the case of the TODGA solvent. The gamma irradiations were conducted in the presence or absence of an acidic aqueous phase. The determined dose constants for TODGA under neutral or acidic conditions were up to four times lower than the values reported in aliphatic diluents under comparable conditions. The degradation patterns were similar to those found by former studies on TODGA diluted in n-dodecane; only de-alkylation and bond ruptures within the diglycolamide core were observed. The presence of an acidic aqueous phase during irradiation resulted in a different relative abundance of certain radiolysis products of both the diluent and TODGA and a higher dose constant compared to the neutral irradiation conditions. A quantification of CyMe4BTPhen in irradiated samples with the [N1888][NO3] diluent was not possible, but the effect on its extraction properties was evaluated. The distribution ratios slightly increased under the effect of absorbed dose, indicating the formation of radiolysis products that are efficient extractants as well.

13 July 2020 in Solvent Extraction and Ion Exchange
Verified
Journal Article
Closed access
PZPeter Zsabka
Peter Zsabka
Tomas OpsomerTomas Opsomer
Tomas Opsomer
KHKaren Van Hecke
Karen Van Hecke
Wim DehaenWim Dehaen
Wim Dehaen
Andreas WildenAndreas Wilden
Andreas Wilden
TCThomas Cardinaels
Thomas Cardinaels
A new N-atom donor extractant 2,9-bis(1-(2-ethylhexyl)-1H-1,2,3-triazol-4-yl)-1,10-phenanthroline (EH-BTzPhen) was synthesized and used in solvent extraction studies to separate the trivalent minor actinide americium(III) and curium(III) from europium(III), representing fission product lanthanides. The extractant was found to be soluble in 1-octanol and in the Aliquat-336 nitrate ([A336][NO3]) ionic liquid diluent, but insoluble in n-dodecane. The [A336][NO3] is a fully incinerable room temperature ionic liquid, and has a higher flash point than aliphatic diluents such as 1-octanol. The EH-BTzPhen proved to be effective for selective minor actinide extraction only in combination with 2-bromohexanoic acid synergist when 1-octanol was used as a diluent (SF Am/Eu > 200). The change of the diluent from 1-octanol to Aliquat-336 nitrate allowed selective An(III) extraction from low acidity feed solutions without the need of a synergist (SF Am/Eu ~ 70 and SF Am/Cm ~ 1.9–2.2). The phase transfer kinetics of the ligand-metal complexes is however very slow at 22°C in the case of both solvents. With this newly synthesized extractant, the achieved SF Am/Cm was comparable to the values achieved with the established CyMe4BTBP and CyMe4BTPhen extractants.

21 January 2020 in Solvent Extraction and Ion Exchange
Verified
Journal Article
Closed access
PZPeter Zsabka
Peter Zsabka
KHKaren Van Hecke
Karen Van Hecke
Andreas WildenAndreas Wilden
Andreas Wilden
GMGiuseppe Modolo
Giuseppe Modolo
MVMarc Verwerft
Marc Verwerft
TCThomas Cardinaels
Thomas Cardinaels
The feasibility of separating americium from curium and the lanthanides was studied in batch solvent extraction experiments using an organic solvent composed of 0.01 mol L−1 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline (CyMe4BTPhen) in the ionic liquid Aliquat-336 nitrate [A336][NO3] from feed solutions containing N,N,N’,N’-tetraethyl diglycolamide (TEDGA), stable lanthanide ions and tracers of 241Am, 244Cm, and 152Eu. The combined use of a lipophilic and a hydrophilic ligand with opposite selectivity for Am(III) vs. Cm(III) and Ln(III) allowed the separation of Am(III) from Cm(III) and Ln(III) from moderate acidic feed solutions (1 mol L−1 HNO3, SFAm/Cm = 3.1–3.9, SFAm/La > 75, SFAm/Eu ≥ 3000).

3 February 2021 in RSC Advances
Verified
Journal Article
Open access
PDF file
PZPéter Zsabka
Péter Zsabka
KHKaren Van Hecke
Karen Van Hecke
LALesley Adriaensen
Lesley Adriaensen
Andreas WildenAndreas Wilden
Andreas Wilden
GMGiuseppe Modolo
Giuseppe Modolo
TCThomas Cardinaels
Thomas Cardinaels
Improving the kinetics of selective An(iii) extraction from nitric acid feed solutions into an ionic liquid based solvent: combining CyMe4BTPhen with TODGA in Aliquat-336 nitrate.

1 June 2017 in Journal of Nuclear Materials
Verified
Journal Article
Closed access
PZPéter Zsabka
Péter Zsabka
GLGregory Leinders
Gregory Leinders
ABAngela Baena
Angela Baena
TCThomas Cardinaels
Thomas Cardinaels
KBKoen Binnemans
Koen Binnemans
MVMarc Verwerft
Marc Verwerft