1 February 2016 in Ceramics International
30 July 2023 in Advanced Functional Materials
9 February 2021 in Carbon Energy
The flexible self‐supporting electrode can maintain good mechanical and electrical properties while retaining high specific capacity, which meets the requirements of flexible batteries. Lithium‐sulfur batteries (LSBs), as a new generation of energy storage system, hold much higher theoretical energy density than traditional batteries, and they have attracted extensive attention from both the academic and industrial communities. Selection of a proper substrate material is important for the flexible self‐supporting electrode. Carbon materials, with the advantages of light weight, high conductivity, strong structural plasticity, and low cost, provide the electrode with a large loading space for the active material and a conductive network. This makes the carbon materials meet the mechanical and electrochemical requirements of flexible electrodes. In this paper, the commonly used fabrication methods and recent research progresses of the flexible self‐supporting cathode with a carbon material as the substrate are introduced. Various sulfur loading methods are summarized, which provides useful information for the structural design of the cathode. As the first review article of the carbon‐based flexible self‐supporting LSB cathodes, it provides valuable guidance for the researchers working in the field of LSB.
5 July 2018 in Journal of Materials Chemistry A
Co-axial silicon-coated carbon nanotubes (CNTs/Si) were successfully synthesized via a hydrothermal method. Sandwich-like carbon-coated CNTs/Si were obtained by an additional carbon coating. The as-prepared materials show superior cycling performance as anode materials in lithium ion batteries with a current density as high as 500 mA g−1 with no observable structural changes during the charge/discharge process. In addition, stable reversible discharge capacities as high as 1508.5 mA h g−1 after 1000 cycles were obtained. At higher current densities of 1 A g−1 and 2 A g−1, the CNTs/Si/C nanotubes also showed ideal cycling performance with reversible discharge capacities of 1216.6 mA h g−1 and 932.2 mA h g−1, respectively. The sandwich-like hollow tube structure of CNTs/Si/C not only alleviates the volume change during cycling, but also facilitates Li-ion and electron transport, and stabilizes the SEI layer. These results suggest that sandwich-like CNTs/Si/C nanotubes are a promising anode material for lithium ion batteries.
1 February 2021 in Journal of Energy Chemistry
1 September 2013 in Journal of the European Ceramic Society