16 April 2018 in IEEE Transactions on Plasma Science
Based on Love's shell theory, the critical velocity of a flexural wave in the composite housing of rail-gun barrel is calculated through using the calculation principle of 3-D effective elastic moduli of composite laminate. The result is close to the one predicted by the finite-element method. A 3-D nonlinear transient finite-element model based on the damage mechanics theory and multilayered solid element is established for the filament-wound composite barrel of rail gun under moving electromagnetic pressure. It is used to analyze the dynamic responses and the initiation and development of damage for the rail-gun barrel from the viewpoint of propagation of stress wave. Simulation results reveal that some physical quantities in composite housing for rail-gun barrel, such as stress and displacement, are enlarged obviously with the moving velocity of electromagnetic pressure near the critical velocity of composite housing for rail-gun barrel. Because of the actions of stress waves in barrel, such as reflection, matrix failure occurs first on some axisymmetric planes of composite housing.
7 November 2024 in IEEE Transactions on Plasma Science
Based on the theory of moving electromagnetic (EM) systems, a 3-D numerical simulation model of the transient EM field of the series-enhanced EM railgun is established by using the finite element (FE)/boundary element (BE) coupling method. The sliding electrical contact between the armature and rails is also considered in this model. The distribution of in-bore magnetic field of this kind of railgun is compared with the one of the monorail railgun. Based on this model, the evolutions of the current of the in-bore shield and the EM field in this shield’s cavity are simulated in its launching process. The effects of the shield’s materials and motion on the induced current and magnetic field of the shield are analyzed. The results reveal that because of the addition of the enhanced rails, the distributions of the current and the magnetic field in the rails and armature for the series-enhanced EM railgun are different from the ones for the monorail railgun, and the distribution of the in-bore magnetic field for the former is more complex than the one for the latter. The structure of induced current in the copper shield is basically similar to the one in the industrial pure iron, but there are some differences in their evolutions between the two kinds of material shields, which lead to the differences in the distributions of the magnetic field. The shield’s motion influences the distribution of the magnetic field in the shield’s cavity, which is a complex process.
28 October 2025 in IEEE Transactions on Magnetics
Based on the finite element/boundary element coupling method, a three-dimensional (3D) numerical simulation model of transient electromagnetic field of railgun is established to simulate the diffusion of current and magnetic field on the shields with different material combinations in the bore, as well as the evolution process of magnetic field in shield’s cavity. The sliding electrical contact is defined between the rails and armature in this model. Combining with the theoretical analysis methods, the time of magnetic field diffusion in different shielding materials is evaluated. The influence of shields’ materials and the form of pulse current on the shielding effectiveness of the shield is analyzed through the simulation model. In order to investigate the effect of magnetic-structural coupling on the shielding effectiveness of shield, a magnetic-structural coupling simulation model of railgun launching process is also set up based on the multi-field coupling principle. The results reveal that in the strong magnetic field of bore, the shield made of copper material with higher conductivity can relatively significantly prevent the diffusion of magnetic field into the shield’s cavity. So its shielding effect is relatively good. With different form of pulse current, the dominant shielding mechanism will vary, resulting in differences of shielding effectiveness of shields in the bore. The distribution of magnetic field on the shield with and without considering the magnetic-structural coupling is different, especially with the passage of time, the difference is more obvious.