We examine the microstructural and mechanical changes which occur during oscillatory shear flow and reformation after flow cessation of an intermediate volume fraction colloidal gel using rheometry and Brownian Dynamics (BD) simulations. A model depletion colloid–polymer mixture is used, comprising a hard sphere colloidal suspension with the addition of non-adsorbing linear polymer chains. The results reveal three distinct regimes depending on the strain amplitude of oscillatory shear. Large shear strain amplitudes fully break the structure which results in a more homogenous and stronger gel after flow cessation. Intermediate strain amplitudes densify the clusters and lead to highly heterogeneous and weak gels. Shearing the gel to even lower strain amplitudes creates a less heterogonous stronger solid. These three regimes of shearing are connected to the microscopic shear-induced structural heterogeneity. A comparison with steady shear flow reveals that the latter does not produce structural heterogeneities as large as oscillatory shear. Therefore oscillatory shear is a much more efficient way of tuning the mechanical properties of colloidal gels. Moreover, colloidal gels presheared at large strain amplitudes exhibit a distinct nonlinear response characterized largely by a single yielding process while in those presheared at lower rates a two-step yielding process is promoted due to the creation of highly heterogeneous structures.
The design of hydrogels where multiple interpenetrating networks enable enhanced mechanical properties can broaden their field of application in biomedical materials, 3D printing, and soft robotics. We report a class of self-reinforced homocomposite hydrogels (HHGs) comprised of interpenetrating networks of multiscale hierarchy. A molecular alginate gel is reinforced by a colloidal network of hierarchically branched alginate soft dendritic colloids (SDCs). The reinforcement of the molecular gel with the nanofibrillar SDC network of the same biopolymer results in a remarkable increase of the HHG’s mechanical properties. The viscoelastic HHGs show >3× larger storage modulus and >4× larger Young’s modulus than either constitutive network at the same concentration. Such synergistically enforced colloidal-molecular HHGs open up numerous opportunities for formulation of biocompatible gels with robust structure-property relationships. Balance of the ratio of their precursors facilitates precise control of the yield stress and rate of self-reinforcement, enabling efficient extrusion 3D printing of HHGs.
The transient response of model hard sphere glasses is examined during the application of steady rate start-up shear using Brownian dynamics simulations, experimental rheology and confocal microscopy. With increasing strain, the glass initially exhibits an almost linear elastic stress increase, a stress peak at the yield point and then reaches a constant steady state. The stress overshoot has a nonmonotonic dependence with Peclet number, Pe, and volume fraction, φ, determined by the available free volume and a competition between structural relaxation and shear advection. Examination of the structural properties under shear revealed an increasing anisotropic radial distribution function, g(r), mostly in the velocity-gradient (xy) plane, which decreases after the stress peak with considerable anisotropy remaining in the steady-state. Low rates minimally distort the structure, while high rates show distortion with signatures of transient elongation. As a mechanism of storing energy, particles are trapped within a cage distorted more than Brownian relaxation allows, while at larger strains, stresses are relaxed as particles are forced out of the cage due to advection. Even in the steady state, intermediate super diffusion is observed at high rates and is a signature of the continuous breaking and reformation of cages under shear.
The mechanism of flow in glassy materials is interrogated using mechanical spectroscopy applied to model nearly hard sphere colloidal glasses during flow. Superimposing a small amplitude oscillatory motion orthogonal onto steady shear flow makes it possible to directly evaluate the effect of a steady state flow on the out-of-cage () relaxation as well as the in-cage motions. To this end, the crossover frequency deduced from the viscoelastic spectra is used as a direct measure of the inverse microstructural relaxation time, during flow. The latter is found to scale linearly with the rate of deformation. The microscopic mechanism of flow can then be identified as a convective cage release. Further insights are provided when the viscoelastic spectra at different shear rates are shifted to scale the alpha relaxation and produce a strain rate-orthogonal frequency superposition, the colloidal analogue of time temperature superposition in polymers with the flow strength playing the role of temperature. Whereas the scaling works well for the relaxation, deviations are observed both at low and high frequencies. Brownian dynamics simulations point to the origins of these deviations; at high frequencies these are due to the deformation of the cages which slows down the short-time diffusion, while at low frequency, deviations are most probably caused by some mild hydroclustering.