Kazuo Nishimoto

Kazuo Nishimoto

Auto-generated profile, based on publicly available information

Kazuo Nishimoto

University of São Paulo (USP)

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 September 2010 in Journal of Offshore Mechanics and Arctic Engineering
Verified
Journal Article
Closed access
PDF file
Rodolfo Trentin GonçalvesRodolfo Trentin Gonçalves
Rodolfo Trentin Gonçalves
AFAndré Luís Condino Fujarra
André Luís Condino Fujarra
GRGuilherme F. Rosetti
Guilherme F. Rosetti
KNKazuo Nishimoto
Kazuo Nishimoto
A great deal of works has been developed on the spar vortex-induced motion (VIM) issue. There are, however, very few published works concerning VIM of monocolumn platforms, partly due to the fact that the concept is fairly recent and the first unit was only installed last year. In this context, a meticulous study on VIM for this type of platform concept is presented here. Model test experiments were performed to check the influence of many factors on VIM, such as different headings, wave/current coexistence, different drafts, suppression elements, and the presence of risers. The results of the experiments presented here are motion amplitudes in both in-line and transverse directions, forces and added-mass coefficients, ratios of actual oscillation and natural periods, and motions in the XY plane. This is, therefore, a very extensive and important data set for comparisons and validations of theoretical and numerical models for VIM prediction.

19 September 2015 in Cluster Computing
Verified
Journal Article
Closed access
PDF file
DFDavi Teodoro Fernandes
Davi Teodoro Fernandes
Liang-Yee ChengLiang-Yee Cheng
Liang-Yee Cheng
EFEric Henrique Favero
Eric Henrique Favero
KNKazuo Nishimoto
Kazuo Nishimoto

13 October 2011 in Journal of Offshore Mechanics and Arctic Engineering
Verified
Journal Article
Closed access
PDF file
Rodolfo Trentin GonçalvesRodolfo Trentin Gonçalves
Rodolfo Trentin Gonçalves
GRGuilherme F. Rosetti
Guilherme F. Rosetti
AFAndré Luís Condino Fujarra
André Luís Condino Fujarra
KNKazuo Nishimoto
Kazuo Nishimoto
Vortex-induced motions (VIM) of floating structures are very relevant for the design of mooring and riser systems. In the design phase, spar and monocolumn VIM behavior, as well as semisubmersible and tension leg platform flow-induced motions, is studied and evaluated. This paper provides a checklist of topics and evidence from a number of sources to justify the selection that should be considered when designing spars or monocolumn platforms regarding the VIM phenomenon. An overview of the influential aspects of the VIM is presented such as heading, external appendages of the hull, concomitant presence of waves and currents, motion suppressor, draft condition (immersed portion of the hull), and external damping due to the presence of risers. Previous works concerning the VIM studies on spar and monocolumn platforms are also addressed. Whenever possible, the results of experiments from diverse authors on this matter are presented and compared.

2 December 2011 in Journal of Offshore Mechanics and Arctic Engineering
Verified
Journal Article
Closed access
PDF file
JAJuan Julca Avila
Juan Julca Avila
KNKazuo Nishimoto
Kazuo Nishimoto
CSClaudio Mueller Sampaio
Claudio Mueller Sampaio
JAJulio C. Adamowski
Julio C. Adamowski
The determination of hydrodynamic coefficients of full scale underwater vehicles using system identification (SI) is an extremely powerful technique. The procedure is based on experimental runs and on the analysis of on-board sensors and thrusters signals. The technique is cost effective and it has high repeatability; however, for open-frame underwater vehicles, it lacks accuracy due to the sensors’ noise and the poor modeling of thruster-hull and thruster-thruster interaction effects. In this work, forced oscillation tests were undertaken with a full scale open-frame underwater vehicle. These conducted tests are unique in the sense that there are not many examples in the literature taking advantage of a PMM installation for testing a prototype and; consequently, allowing the comparison between the experimental results and the ones estimated by parameter identification. The Morison’s equation inertia and drag coefficients were estimated with two parameter identification methods, that is, the weighted and the ordinary least-squares procedures. It was verified that the in-line force estimated from Morison’s equation agrees well with the measured one except in the region around the motion inversion points. On the other hand, the error analysis showed that the ordinary least-squares provided better accuracy and, therefore, was used to evaluate the ratio between inertia and drag forces for a range of Keulegan–Carpenter and Reynolds numbers. It was concluded that, although both experimental and estimation techniques proved to be powerful tools for evaluation of an open-frame underwater vehicle’s hydrodynamic coefficients, the research provided a rich amount of reference data for comparison with reduced models as well as for dynamic motion simulation of ROVs.

12 October 2011 in Journal of Offshore Mechanics and Arctic Engineering
Verified
Journal Article
Closed access
PDF file
Rodolfo Trentin GonçalvesRodolfo Trentin Gonçalves
Rodolfo Trentin Gonçalves
GFGuilherme Franzini
Guilherme Franzini
GRGuilherme F. Rosetti
Guilherme F. Rosetti
AFAndré Luís Condino Fujarra
André Luís Condino Fujarra
KNKazuo Nishimoto
Kazuo Nishimoto
Vortex-induced motion (VIM) is a highly nonlinear dynamic phenomenon. Usual spectral analysis methods, using the Fourier transform, rely on the hypotheses of linear and stationary dynamics. A method to treat nonstationary signals that emerge from nonlinear systems is denoted Hilbert–Huang transform (HHT) method. The development of an analysis methodology to study the VIM of a monocolumn production, storage, and offloading system using HHT is presented. The purposes of the present methodology are to improve the statistics analysis of VIM. The results showed to be comparable to results obtained from a traditional analysis (mean of the 10% highest peaks) particularly for the motions in the transverse direction, although the difference between the results from the traditional analysis for the motions in the in-line direction showed a difference of around 25%. The results from the HHT analysis are more reliable than the traditional ones, owing to the larger number of points to calculate the statistics characteristics. These results may be used to design risers and mooring lines, as well as to obtain VIM parameters to calibrate numerical predictions.

12 October 2011 in Journal of Offshore Mechanics and Arctic Engineering
Verified
Journal Article
Closed access
PDF file
Rodolfo Trentin GonçalvesRodolfo Trentin Gonçalves
Rodolfo Trentin Gonçalves
GRGuilherme F. Rosetti
Guilherme F. Rosetti
AFAndré Luís Condino Fujarra
André Luís Condino Fujarra
KNKazuo Nishimoto
Kazuo Nishimoto
An analysis methodology is presented as well as a comparison of results obtained from vortex-induced motion (VIM) model tests of the MonoGoM platform, a monocolumn floating unit designed for the Gulf of Mexico. The choice of scale between the model and the platform in which the tests took place was a very important issue that took into account the basin dimensions and mooring design. The tests were performed in three different basins: the IPT Towing Tank in Brazil (Sept. 2005), the NMRI Model Ship Experimental Towing Tank in Japan (Mar. 2007), and the NMRI Experimental Tank in Japan (Jun. 2008). The purpose is to discuss the most relevant issues regarding the concept, execution, and procedures to comparatively analyze the results obtained from VIM model tests, such as characteristic motion amplitudes, motion periods, and forces. The results pointed out the importance of considering the 2DOF in the model tests, i.e., the coexistence of the motions in both in-line and transverse directions. The approach employed in the tests was designed to build a reliable data set for comparison with theoretical and numerical models for VIM prediction, especially that of monocolumn platforms.