8 May 2018 in Semiconductor Science and Technology
Full integration of Ge-based alloys like GeSn with complementary-metal-oxide-semiconductor technology would require the fabrication of p- and n-type doped regions for both planar and tri-dimensional device architectures which is challenging using in situ doping techniques. In this work, we report on the influence of ex situ doping on the structural, electrical and optical properties of GeSn alloys. n-type doping is realized by P implantation into GeSn alloy layers grown by molecular beam epitaxy (MBE) followed by flash lamp annealing. We show that effective carrier concentration of up to 1 × 10 19 cm −3 can be achieved without affecting the Sn distribution. Sn segregation at the surface accompanied with an Sn diffusion towards the crystalline/amorphous GeSn interface is found at P fluences higher than 3 × 10 15 cm −2 and electron concentration of about 4 × 10 19 cm −3 . The optical and structural properties of ion-implanted GeSn layers are comparable with the in situ doped MBE grown layers.
15 June 2004 in Materials Science Forum
4 October 2017 in Semiconductor Science and Technology
Highly scaled nanoelectronics requires effective channel doping above 5 × 10 19 cm −3 together with ohmic contacts with extremely low specific contact resistivity. Nowadays, Ge becomes very attractive for modern optoelectronics due to the high carrier mobility and the quasi-direct bandgap, but n-type Ge doped above 5 × 10 19 cm −3 is metastable and thus difficult to be achieved. In this letter, we report on the formation of low-resistivity ohmic contacts in highly n-type doped Ge via non-equilibrium thermal processing consisting of millisecond-range flash lamp annealing. This is a single-step process that allows for the formation of a 90 nm thick NiGe layer with a very sharp interface between NiGe and Ge. The measured carrier concentration in Ge is above 9 × 10 19 cm −3 with a specific contact resistivity of 1.2 × 10 −6 Ω cm 2 . Simultaneously, both the diffusion and the electrical deactivation of P are fully suppressed.
25 June 2012 in Applied Physics Letters
Heavily Ga implanted Si nanolayers covered with a thin SiO2 layer exhibit a superconductor-insulator transition in dependence on annealing conditions. The transition characteristics resemble those of ultrathin quench-condensed metal films although the implanted layer differs clearly in composition, width, and nanostructure. This implies a general physical mechanism for the superconductor-insulator transition in thin, disordered layers which is supposed to be a quantum phase transition between dual states—the superconducting and the superinsulating one. There is a resistance criterion for the phase transition closely associated with a critical hole concentration.
13 October 2008 in Applied Physics Letters
Flash lamp annealing in the millisecond range has been used to induce buried melting in silicon. For this purpose high dose high-energy germanium implantation has been employed to lower the melting temperature of silicon in a predetermined depth region. Subsequent flash lamp treatment at high energy densities leads to local melting of the germanium rich layer. The thickness of the molten layer has been found to depend on the irradiation energy density. During the cool-down period, epitaxial crystallization takes place resulting in a largely defect-free layer.
30 December 2009 in Physical Review B