2 June 2022 in Science of The Total Environment
29 September 2020 in PeerJ
Background: To quantitatively evaluate the contribution of plant roots to soil shear strength, the generalized equivalent confining pressure (GECP), which is the difference in confining pressure between the reinforced and un-reinforced soil specimens at the same shear strength, was proposed and considered in terms of the function of plant roots in soil reinforcement. Methods: In this paper, silt loam soil was selected as the test soil, and the roots of Indigofera amblyantha were chosen as the reinforcing material. Different drainage conditions (consolidation drained (CD), consolidation undrained (CU), and unconsolidated undrained (UU)) were used to analyse the influences of different root distribution patterns (horizontal root (HR), vertical root (VR), and complex root (CR)) and root contents (0.25%, 0.50%, and 0.75%) on the shear strength of soil-root composites. Results: The cohesion (c) values of the soil-root composites varied under different drainage conditions and root contents, while the internal friction angle (φ ) values remain basically stable under different drainage conditions. Under the same root content and drainage conditions, the shear strength indexes ranked in order of lower to higher were HR, VR and CR. The GECP of the soil-root composites with a 0.75% root content was 1.5–2.0 times that with a 0.50% root content and more than 5 times that with a 0.25% root content under the CD and CU conditions. The GECP in reinforced soil followed the sequence of CD > CU > UU. The GECP of the plant roots increased as confining pressure increased under CD and CU conditions while showed a complex change to the confining pressure under the UU condition. Conclusion: It was concluded that the evaluation of plant root reinforcing soil based on GECP can be used to measure effectively the influences of roots on soil under different drainage conditions and root distribution patterns.
1 January 2018 in Advances in Materials Science and Engineering
Vegetation‐concrete is one of the most widely used substrates in ecological slope protection engineering. The porosity of the vegetation‐concrete must be high enough to satisfy the growth needs of the plant roots, while the mechanical properties must be strong enough to satisfy the self‐stability requirement of the substrates on the slope. It is necessary to balance these two aspects in the design of vegetation‐concrete. As one of the main components in vegetation‐concrete, organic material has a remarkable effect on both the porosity and the mechanical properties of the substrate. In this paper, four types of common organic materials (rice husks, sawdust, and corn distillers’ and unhulled rice distillers’ grain) are chosen to research the effect of the organic material type and proportion on the porosity and mechanical properties of the substrate. The experimental results show that the porosity of samples containing corn distillers’ grain is clearly higher than those of the other samples types, while situation of the mechanical properties is the opposite. It can be concluded that organic material with a large grain size is not suitable for use in vegetation‐concrete directly and needs to be crushed before use to prevent crack formation. The research results also show that the rates of increase in porosity decrease with more organic material added, while the rates of decrease in the unconfined compressive strength and the elasticity modulus increase. From a comprehensive consideration of the required mechanical properties and plant growth, organic material with a small grain size is most suitable for use in vegetation‐concrete, and the suitable proportion is between 7% and 9%.
15 July 2025 in Journal of Mountain Science