The phenomena of strong pressure occurrences have been observed many times in the #311103 working face of the Bayangaole Coal Mine. Deep‐hole blasting measures were used to relieve the pressure in order to decrease the danger levels of these strong pressure occurrences on the working face. The blasting layouts proposed in this study differed from the conventional blasting layouts of a “straight‐line” design by instead utilizing “triangular‐fractal” and “deep‐shallow‐fractal” for the purpose of successfully driving the explosive efficiency and enlarging the roof‐blasting range. The fractal dimension of the “triangular‐fractal” blasting layout was calculated as 1.1274. The fractal dimension of the “deep‐shallow‐fractal” was calculated to be 1.556. The fractal dimensions of both improved layouts were found to be larger than that of the “straight‐line” blasting layout (1.0). In addition, the Mises stress evolution and the changed trend of the effective stress and strain of the observation points around the hole of the three layouts are analyzed and compared by LS‐DYNA numerical simulation software. The results indicated that the “deep‐shallow‐fractal” blasting layout had the most effective blasting effects, followed by the “triangular‐fractal” blasting layout. It was determined that the traditional “straight‐linear” blasting layout had the least effective blasting effects of the three examined layouts. In summary, the implementations of the improved fractal blasting layouts in this study were found to be conducive to the enhancement of the blasting effects.
Rock burst is one of the major dynamic disasters that directly threaten production safety in coal mines. According to the current research, the occurrence of rock burst can be described by the generalized Newton’s second law with three elements which are research object, force condition, and motion state. These three elements refer to the coal and rock mass in the mining area, concentrated static and dynamic loads, and dynamic instability of surrounding rock, respectively. On this basis, a comprehensive rock burst research method involving the three elements of Newton’s second law was proposed, which especially focuses on the investigation into geological conditions of mining areas. The research procedure of this method specifically includes the detailed exploration of engineering geological bodies, the classification and stability evaluation of surrounding rock, the measurement and inversion of in situ stress, the evolution analysis of mining-induced stress field, energy field, and fracture field, the study of multiscale failure mechanism of coal and rock mass, the establishment of theoretical failure model of coal and rock mass, the real-time monitoring and warning in potentially dangerous areas, and the reasonable prevention and control in key risk zones. As a preliminary discussion, the significant research progress in each aspect mentioned above has been reviewed and the feasible research directions of rock burst are presented in this paper.