In this paper, a compact, cost-effective, and fast translational online-switchable phase-shifting fringe (TOPF) projector is designed and fabricated for high accuracy three-dimensional (3D) face imaging. Compared with the conventional mechanical projectors, the main difference is that it utilizes a translational approach instead of a rotational one to achieve a better balance in terms of size, speed, accuracy, and cost. To mitigate the inconsistency of the motor's step size and ensure the stability of phase-shifting, an optical encoder-based feedback control mechanism is employed. Additionally, to address the random phase shift errors induced by mechanical motion, a fast, generalized phase-shifting algorithm with unknown phase shifts (uPSAs) that can calculate arbitrary phase shifts is proposed. Finally, a 3D imaging system consisting of the TOPF projector and two cameras is constructed for experimental validation. The feasibility, effectiveness, and precision of our proposed method are substantiated through the reconstruction of a static facial model and a dynamic real face.
<!-- *** Custom HTML *** --> A three-dimensional (3D) face profilometry based on facial landmarks and a multi-view system is proposed. Theoretically, at least three fringe patterns are required in phase-shifting profilometry, but the stereo relative phase pair obtained by a spatial unwrapping algorithm cannot be used for stereo matching directly because the starting points of phase unwrapping are not on the same fringe period order, so it will result in incorrect disparity. We proposed an innovative method that utilizes facial landmarks as prior knowledge to adjust the relative phase pair to the same phase reference for accurate stereo matching through a phase adjustment algorithm to determine the accurate fringe order difference. The three-step phase-shifting patterns are projected in a looping sequence, and each three-adjacent fringe stereo pair is treated as a group to obtain one frame of a 3D face, which means that the 3D face output of our proposed method can achieve the same frame rate as the camera. The accuracy evaluation and dynamic 3D facial expressions reconstruction verify the success of the proposed method.
The human face is an important channel for human interaction and is the most expressive part of the human body with personalized and diverse characteristics. To improve the modeling speed as well as recognition speed and accuracy of 3D faces, this paper proposes a laser scanning binocular stereo vision imaging method based on binocular stereo vision and depth-sensing detection method. Existing matching methods have a weak anti-interference capability, cannot identify the spacing of objects quickly and efficiently, and have too large errors. Using the technique mentioned in this paper can remedy these shortcomings by mainly using the laser lines scanned onto the object as strong feature cues for left and right views for binocular vision matching and thus for depth measurement perception of the object. The experiments in this paper first explore the effect of parameter variation of the laser scanning binocular vision imaging system on the accuracy of object measurement depth values in an indoor environment; the experimental data are selected from 68 face feature points for modeling, cameras that photograph faces, stereo calibration of the cameras using calibration methods to obtain the parameters of the binocular vision imaging system, and after stereo correction of the left and right camera images, the laser line scan light is used as a pixel matching strong features for binocular camera matching, which can achieve fast recognition and high accuracy and then select the system parameters with the highest accuracy to perform 3D reconstruction experiments on actual target objects in the indoor environment to achieve faster recognition.
In the field of psychological analysis, the ability to measure high-precision 3D facial (micro) expression sequence data is crucial for understanding emotions and psychological states in specific contexts. However, the real-time high-precision acquisition of continuous 3D facial data still faces challenges due to the limitations of DLP technology in terms of integration, spectral range, cost, and projection rate. This paper introduces a compact, cost-effective, and high-speed infrared pre-aligned micro-projection array (PAMPA) projector to overcome these limitations. The projector employs three independent physical imaging optical paths, enabling time-division control for varied projection patterns, thus avoiding the utilization of a motor as seen in traditional mechanical projectors. The design incorporates an integrated fringe mask, an even and aberration-free light path, high-precision T-slot structural components, and micrometer screw phase alignment technology to address phase alignment issues. It also uses an efficient random phase shift extraction algorithm for phase calculation. Experimental results have verified the success of the proposed method.
23 February 2026 in IEEE Transactions on Instrumentation and Measurement
Achieving both high precision and efficiency in fringe projection profilometry (FPP) remains a fundamental challenge. Among the existing strategies, phase-coding methods are known for their high encoding efficiency, but their performance deteriorates significantly under high-frequency fringe projection due to quantization errors, limiting their applicability in precision measurement tasks. To overcome these limitations, Cyclic Sequence Phase Coding (CSPC) algorithm is proposed. At the encoding stage, CSPC employs a unique strategy that exploits the directional uniqueness of cyclic sequences to compactly encode fringe orders. During decoding, a composite information extraction algorithm is introduced to simultaneously obtain recognition and error-correction features. These features guide a two-stage order recognition process—initial recognition followed by refined recognition—leveraging spatial image cues to accurately determine fringe orders. Additionally, a spatial shifting phase unwrapping algorithm is designed to reconstruct smooth, mismatch-free absolute phase by directly incorporating the extracted error-correction information. Extensive static and dynamic experiments demonstrate that CSPC can robustly reconstruct complex surfaces under low signal-to-noise ratio (SNR) conditions, with as few as two auxiliary patterns and fringe frequency up to 76. These results confirm the robustness, accuracy, and practical superiority of the proposed approach.
22 June 2022 in Mathematical Problems in Engineering
Three-dimensional face recognition is one of the hotspots of biometric recognition and has a wide range of applications in the fields of information security, video surveillance, video tracking, and so on. The core part of 3D face recognition is to establish the corresponding 3D face model, and the key of building the model is how to obtain the shape model and accurate texture mapping. The problem has not been well solved in the field of face reconstruction. Based on the background, this paper makes an in-depth study and proposes a three-dimensional face recognition method based on multiresolution model and fuzzy random matrix. The face model reconstruction method of image and model can accurately obtain the contour change of face and the representation of specific features through multiresolution model, reduce the inaccurate description of error and noise in samples through fuzzy random matrix, and enhance the effectiveness of image information of classification and recognition. The experimental outcomes exhibit that the 3D face focus approach based totally on multiresolution mannequin and fuzzy random matrix efficiently improves the evaluation effectivity of the model, improves the great of mannequin matching, improves the function extraction in the cognizance process, and improves the attention rate.