In this report, N-benzylhydrazinecarbothioamide (BHCTA) was investigated as an organic inhibitor for the corrosion of copper substrate in 3.5 wt.% sodium chloride electrolyte at 298 K. The inhibition efficiency of BHCTA was examined using electrochemical, chemical and theoretical tools. The gained outcomes indicated a supreme inhibition efficiency of BHCTA which exceeded 95 % upon addition of 1.00 mM of BHCTA. Such supreme efficiency was discussed on the basis of decisive adsorption of BHCTA molecules on the copper substrate that hinders concurrently the anodic oxidation and cathodic reduction reactions progressions. The adsorption of BHCTA on the copper surface was discovered to obey Langmuir isotherm. The resulting value of DGads0 = −35.7 kJ mol−1 indicates that BHCTA molecules adsorb on the copper surface through a spontaneous mix of physisorption and chemisorption processes. A scanning electron microscope was used to examine the effect of BHCTA adsorption on the morphology of the copper surface. Theoretical calculations showed that BHCTA has good adsorption properties on Cu substrate. There is a good consistency between the applied experimental and theoretical tools, confirming the validity of the gained outcomes.
9 March 2025 in Journal of Electrochemical Science and Engineering
The reuse of expired drugs has become a challenge to maintain environmental clean-liness and achieve economic benefit. In this report, two expired drugs, moxifloxacin and norfloxacin, were used as inhibitors for copper corrosion in 3.5 % NaCl solution at different temperatures using several experimental approaches including chemical, electrochemical and spectroscopic techniques. The interaction of these two molecules on the copper surface was also inspected using different adsorption models. Using a dose of 500 mg L-1 of these drugs at 298 K, maximum inhibition efficiencies (IE) of 88.7 and 85.2 % were estimated from the potentiodynamic polarization technique for Mox and Nor, respectively., confirming that they can be considered as promising and effective inhibitors. The IE values were enhanced with increasing drugs doses and reduced with rising temperature. The higher IE is due to the strong adsorption of these molecules on the copper surface and such adsorption is physical in nature and follows the Langmuir adsorption isotherm. This is due to their unique chemical structures as they contain a number of functional groups. Polarization experiments confirmed that the drugs were tuned to behave as mixed-type inhibitors with an anodic predominance. All thermos¬dynamic and kinetic parameters were calculated and discussed in details, and the inhibition mechanism is proposed. All experimental results obtained by different techniques were in agreement with each other.
8 September 2023 in Applied Organometallic Chemistry