1 March 2008 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
An extremely high-sensitivity image sensor has been developed with a combination of an active-matrix high-efficiency electron emission device (HEED) array and a high-gain avalanche rushing amorphous photoconductor (HARP) target. Following the description of the requirements for the use of the electron emitter as an image-sensing probe, the characteristics of a fabricated active-matrix HEED image sensor with a HARP target are presented by image-pickup experiments under a dark condition. The emission current density of the experimental HEED under an active-matrix drive was corresponding to a practical level. A clear image observed in the prototype compact camera demonstrates that the surface-emitting HEED is useful for image sensing based on HARP with high sensitivity and sufficient definition.
1 March 2021 in Physics of Plasmas
A virtual cathode oscillator (vircator), which can generate a high-power microwave, has been widely studied over the last four decades. This paper describes the dependence of microwaves and electron beams generated in a reflex triode vircator on the electrode shape and material. The reflex triode vircator is driven by a Marx generator with an output voltage of 200 kV and a stored energy of 240 J. Experiments were conducted with aluminum and velvet cathodes and two types of electrode shapes: (1) circular, with a diameter of 46 mm, and (2) elliptical, with an aspect ratio of 2:3. Both shapes have the same emitting area. Experimental results revealed that the electric field strength of the microwave pulse generated with the elliptical area electrode was 1.3 times greater than that with the circular area electrode. In addition, an x-ray pinhole camera with a beryllium window was used to evaluate the cross-sectional shape of the electron beam. It was found from the x-ray images that the shape of the electron beam was nearly the same as that of the electrode and that the cross-sectional area of the elliptical electron beam was larger than that of the circular electrode although both the circular and elliptical electrodes have the same emitting area. These results show that the electrode shape is one of the important parameters for the vircator.