29 November 2023 in IEEE Open Journal of Antennas and Propagation
In this paper, a characteristic mode (CM)-based design methodology is developed for the reconfigurable microwave metasurface absorbers (MMA) with using commercially available substrates. Theoretical intrinsic connection between modal behaviors and absorption properties is first formulated for the design of the structures. As a proof of the method, a broadband MMA consisting of butterfly elements is step-by-step designed. The positions and values of the impedance loading are determined based on the modal significances and modal currents for broadband operation. The absorption performance is evaluated by the formulated theoretical model and verified by full-wave simulation. After that, a flexible implementation a employed for free-form surfaces conformal. Experimentally, the proposed MMA is fabricated and measured. The absorption fractional bandwidth with reflectivity less than -10 dB is achieved from 3.6 to 11.6 GHz (105%). Good agreements between the simulation and measurement results for both planar and cylindrical cases validate the developed CM-based design methodology. The mimicry of time-varying scattering cross section (SCS) is then further realized through real-time coding absorption states, which is a promising candidate for practical electromagnetic systems.
28 October 2024 in IEEE Transactions on Microwave Theory and Techniques
In this article, we propose a multifunctional time-modulated metasurface-enabled electromagnetic (EM) tag as a low-complexity, low-cost, and effective alternative for cooperative target recognition. The novel metasurface can execute reflection, absorption, and detection functions within a singular structure, capable of switching among the three impedance states of p-i-n diode. Following the cooperative target identification mechanism, the metasurface tag applies time-modulated sequences to the cooperative radar signals. The realized different discrete frequency components give distinguishable coding signatures to it. While for non-cooperative radar signals, the tag operates in an absorbing state to achieve EM stealth. A prototype working within Ka-band is fabricated and tested, revealing features like a wideband, dual-polarization amplitude modulation, and detection functionality. These outcomes align with simulation expectations and validate the functionalities of the metasurface tag. Further, the anechoic and real scenario experiments demonstrate that the metasurface tag offers the ability to assist in target recognition with reading stability and coding extensions.
15 April 2025 in IEEE Transactions on Microwave Theory and Techniques
Non-contact target identification technology serves as a critical requirement for intelligent microwave sensing systems. In this article, we propose a novel electromagnetic (EM) tag for cooperative target identification based on a multi time-scale modulated metasurface (MTM-MTS). The modulation scheme of the metasurface involves pseudorandom modulation on the fast-time scale and periodic modulation on the slow-time scale. The detector can identify the target in the delay-frequency domain by using correlation operation and Fourier transform on the fast/slow-time scale, respectively. The primary advantage of this approach lies in the security of cooperative target identification and the flexibility of the EM tag encoding. To verify the proposed EM tag, we design and fabricate a reconfigurable metasurface operating at the Ka band. The experimental accuracy of target identification exceeds 0.9 in the monostatic case, demonstrating the effectiveness and reliability of the proposed tag.
11 June 2025 in IEEE Transactions on Antennas and Propagation
This work presents a novel circuit modelling approach for predicting and analyzing the scattering parameters of energy-selective surface (ESS). The proposed circuit model is derived from the theory of characteristic modes, whose solution provides the resonant properties (eigenvalues) and the associated characteristic fields (eigenvectors). The orthogonality of the eigenvectors permits the derivation of a Forster-like Type-II canonical circuit. Full-wave simulations performed on several structures validate the accuracy of the proposed circuit modelling. This provides a useful analytical tool for deriving the scattering properties in the initial design process. In addition, the eigen-solutions provide more field information to support the nonlinear response analysis. As a proof-of-concept, the final ESS design shows triband adaptive protection against high power microwave. It is confirmed that the proposed approach is expected to provide benefits for multiband ESS design.
27 February 2025 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a novel analysis and design methodology for angle-stable frequency selective surface (ASFSS) based on high-order modes modulation. The theory of characteristic mode (TCM) is introduced to expand these resonance properties into the modal space. The provided orthogonal eigen-solutions can effectively distinguish the high-order modes that destroy angular stability. With the supplementary field information, these modes can be physically handled, including modal tuning and suppression, to address the performance degradation with respect to angle. As a proof of concept, a miniaturized ASFSS is designed, fabricated and experimental validation. Both simulation and experimental results show that the ASFSS exhibits excellent angular stability up to 70° with polarization insensitivity. These results of the designed ASFSS demonstrate that the high-order modes modulation-based method has potential to enhance ASFSS performance.
11 November 2024 in IEEE Transactions on Electromagnetic Compatibility
A novel resonance model is formulated to evaluate the resonance properties of frequency-selective surfaces (FSSs) using characteristic modes (CMs). This CM-based resonance model, derived from the Poynting theorem, extends its application to accommodate reconfigurable frequency-selective surfaces (RFSSs) by integrating the equivalent circuit of diodes into the impedance matrix of the method of moments. The model not only provides a well-defined physical interpretation with the CMs but also enhances the analysis and design process of FSSs through insightful field perspectives. To illustrate the proposed CM-based resonance model, we exemplify band-stop and band-pass properties using two types of dipole structures, where the substructure impedance matrix transformation is used to account for the interelements coupling. The model is validated through comprehensive full-wave simulation results. Next, a single-layer triband RFSS is further designed with the aid of the formulated model. Prototypes are fabricated and subjected to measurements, revealing good agreement between simulations and experimental results. The confirmed usefulness in guiding the RFSS design of the proposed resonance model is expected to be of potential application in EMI shielding.