Maliha Noshin

Maliha Noshin

Auto-generated profile, based on publicly available information

Maliha Noshin

Department of Electrical Engineering, Stanford University, Stanford, CA, USA

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2024 in Journal of Physics: Materials
Verified
Journal Article
Open access
KWKelly Woo
Kelly Woo
ZBZhengliang Bian
Zhengliang Bian
MNMaliha Noshin
Maliha Noshin
RMRafael Perez Martinez
Rafael Perez Martinez
MMMohamadali Malakoutian
Mohamadali Malakoutian
SCSrabanti Chowdhury
Srabanti Chowdhury
Wide and ultrawide-bandgap (U/WBG) materials have garnered significant attention within the semiconductor device community due to their potential to enhance device performance through their substantial bandgap properties. These exceptional material characteristics can enable more robust and efficient devices, particularly in scenarios involving high power, high frequency, and extreme environmental conditions. Despite the promising outlook, the physics of UWBG materials remains inadequately understood, leading to a notable gap between theoretical predictions and experimental device behavior. To address this knowledge gap and pinpoint areas where further research can have the most significant impact, this review provides an overview of the progress and limitations in U/WBG materials. The review commences by discussing Gallium Nitride, a more mature WBG material that serves as a foundation for establishing fundamental concepts and addressing associated challenges. Subsequently, the focus shifts to the examination of various UWBG materials, including AlGaN/AlN, Diamond, and Ga2O3. For each of these materials, the review delves into their unique properties, growth methods, and current state-of-the-art devices, with a primary emphasis on their applications in power and radio-frequency electronics.

18 June 2024 in Advanced Functional Materials
Verified
Journal Article
Closed access
SVSam Vaziri
Sam Vaziri
CPChristopher Perez
Christopher Perez
IDIsha M. Datye
Isha M. Datye
HKHeungdong Kwon
Heungdong Kwon
CHChen‐Feng Hsu
Chen‐Feng Hsu
XBXinyu Bao
Xinyu Bao

8 June 2022 in Semiconductor Science and Technology
Verified
Journal Article
Closed access
MNMaliha Noshin
Maliha Noshin
RSRohith Soman
Rohith Soman
XXXiaoqing Xu
Xiaoqing Xu
SCSrabanti Chowdhury
Srabanti Chowdhury
Vertical gallium nitride (GaN) devices are strong candidates for next generation power electronics. Such vertical devices almost always require epitaxial regrowth of GaN. However, impurities present at the regrowth interfaces result in device degradation such as higher leakage current and lower breakdown voltage limiting its performance. While significant interface impurity concentration has been previously detected in the doped samples as well as in the etched-then-regrown samples, the origin of such interface impurity is still not well-understood. In this work, we perform a detailed characterization of the regrowth interface impurities of unintentionally doped (UID) Ga-polar GaN on c-plane sapphire substrate under various growth interruptions. This process (without any doping and without etch-then-regrowth) allows us to probe the relatively pristine regrown interface and thus better understand the origin of regrowth interface impurity. In the metal organic chemical vapor deposition (MOCVD) grown samples, we uncover a significant presence of silicon (Si) impurity concentration at the regrowth interface of an UID GaN for exposure both in air and in glovebox, with ∼88% higher impurity concentration for air exposure. This confirms an inevitable incorporation of Si impurities in the regrowth process originating from air, residual impurities in MOCVD environment and a further adsorption of impurities from the MOCVD chamber. We then demonstrate an ultraviolet (UV) ozone-based cleaning technique to reduce the concentration of Si impurities at the regrown interface. Using an iterative UV-ozone cleaning and wet etching treatment, we realize up to ∼61% reduction in the peak Si impurity concentrations therefore paving the way towards high performance vertical GaN devices.

24 May 2023 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
MNMaliha Noshin
Maliha Noshin
RSRohith Soman
Rohith Soman
SCSrabanti Chowdhury
Srabanti Chowdhury
Devices made from ultrawide bandgap (UWBG) materials are being widely investigated for high-power and radio frequency (RF) electronics. High electron mobility transistor (HEMT) is one of the most effective designs to implement heterostructures in III-Nitrides and III-Oxides that leverage a 2D-channel with high conductivity and large breakdown electric field. Nitrogen (N)-polarity in GaN channel HEMTs have shown remarkable performance advantage in both power and RF applications compared to its metal-polar counterpart. Here, UWBG N-polar AlGaN channel HEMT can bring further performance benefits due to an increase in the channel’s breakdown electric field. In this work, we report the first experimental demonstration of N-polar all-AlGaN HEMT devices with two different Al compositions (20% and 30%) in the channel. The HEMT with 3 μm long-channel (20% Al) showed a drive current of 375 mA/mm (at 0 V gate voltage). These devices also show low on-state leakage current of ~0.5 nA/mm, and large on/off ratio of ~2 x 10 8 . Furthermore, >400 V breakdown voltage was achieved without any field plate structures.

31 January 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
XWXinyi Wen
Xinyi Wen
BSBhawani Shankar
Bhawani Shankar
KLKwangjae Lee
Kwangjae Lee
HKHayao Kasai
Hayao Kasai
MNMaliha Noshin
Maliha Noshin
SCSrabanti Chowdhury
Srabanti Chowdhury
High-frequency, up to 10 MHz, switching of normally-on GaN trench CAVETs was demonstrated using an on-wafer double pulse test (DPT) system, along with high-temperature switching up to 300 °C reported for the first time. By innovatively inserting a low-temperature (LT) GaN interfacial layer to inhibit Mg out-diffusion from p-GaN, a record-high field effect mobility of 1821 cm 2 /(V·s) in a regrown AlGaN/GaN channel was confirmed from device transconductance characteristics, which enabled low-loss high-frequency switching capability of the fabricated device. CAVETs were effectively scaled up to 3-finger structures with reduced specific on-resistance (R on,sp ) to 0.98 mΩ·cm 2 . The device was switched using DPT, showing low turn-off/on times of 2.6/4.8 ns at 1 MHz and 4.5/7.0 ns at 10 MHz switching frequency. The high channel mobility of CAVET not only facilitates robust 10-MHz switching at room temperature but also ensures effective switching functionality even under high-temperature conditions reaching up to 300 °C.

7 August 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
MNMaliha Noshin
Maliha Noshin
XWXinyi Wen
Xinyi Wen
RSRohith Soman
Rohith Soman
XXXiaoqing Xu
Xiaoqing Xu
SCSrabanti Chowdhury
Srabanti Chowdhury
All-AlGaN based high electron mobility transistors (HEMTs) are promising for increasing the power density in both RF and power devices, improving overall efficiency. Nitrogen (N) polar GaN/AlGaN HEMTs offer lower contact resistance compared to its metal-polar counterpart. In this work, we report the metal organic chemical vapor deposition (MOCVD)-based growth of N-polar AlGaN channel HEMT structures with a varying Al mole fraction in the AlxGa1−xN channel (x = 20%, 30%, 59%, and 73%). We confirmed the high-quality morphology and the Al composition of the grown structures using atomic force microscopy and x-ray diffraction spectra, respectively. We measured a mobility of ∼160 cm2/(V.s) in our N-polar AlGaN HEMT stack (20% Al in the channel) structure and found an alloy-scattering dominated transport with increasing Al mole fraction, further supported by our simulations that consider both alloy-scattering and optical phonon-scattering mechanisms. From 20% to 59% Al composition, we found a decreasing trend in mobility while for 59%–73% Al composition in the channel, both the simulated and the experimental mobility showed a nearly saturating trend. The structures were then fabricated into HEMTs with Al0.20Ga0.80N (channel)/Al0.59Ga0.41N (barrier), showing 320 mA/mm drain current for a 4 μm long-channel device.