15 January 2019 in Energy & Environmental Science
Ultrahigh discharge energy density (Wdis = 10.5 J cm−3) and efficiency (η = 87%) have been obtained in doped BiFeO3–BaTiO3 ceramic multilayers by achieving an electrically rather than chemically homogeneous microstructure. Back scattered scanning and transmission electron microscopy combined with energy dispersive X-ray spectroscopy mapping of (0.7 − x)BiFeO3–0.3BaTiO3–xNd(Zn0.5Zr0.5)O3 (0.05 ≤ x ≤ 0.10) ceramics revealed a core–shell grain structure which switched from a bright to dark contrast as x increased. Compositions with x = 0.08 were at the point of cross over between these two manifestations of core–shell contrast. Dielectric measurements together with the absence of macrodomains in diffraction contrast TEM images suggested that compositions with x = 0.08 exhibited relaxor behaviour within both the core and shell regions. Impedance spectroscopy demonstrated that, despite being chemical dissimilar, the grains were electrically homogeneous and insulating with little evidence of conductive cores. Multilayers of x = 0.08 had enhanced breakdown strength, EBDS > 700 kV cm−1 and a slim hysteresis loop which resulted in large Wdis and high η which were temperature stable to <15% from 25 to 150 °C.
29 November 2019 in Science
A million times cooler: Elastocaloric materials can be used for solid-state cooling applications because they can pump heat out of a system using a reversible phase transformation. However, many such materials fail after a small number of cycles. Hou et al. found that laser melting of elastocaloric metals can create fatigue-resistant microstructures. A nickel-titanium–based alloy could be cycled a million times and still produce a cooling of about 4 kelvin. This processing method could improve elastocaloric performance and move us closer to using these materials more widely for solid-state cooling applications. Science , this issue p. 1116
10 December 2018 in Nature Communications
Supported nanoparticles are broadly employed in industrial catalytic processes, where the active sites can be tuned by metal-support interactions (MSIs). Although it is well accepted that supports can modify the chemistry of metal nanoparticles, systematic utilization of MSIs for achieving desired catalytic performance is still challenging. The developments of supports with appropriate chemical properties and identification of the resulting active sites are the main barriers. Here, we develop two-dimensional transition metal carbides (MXenes) supported platinum as efficient catalysts for light alkane dehydrogenations. Ordered Pt3Ti and surface Pt3Nb intermetallic compound nanoparticles are formed via reactive metal-support interactions on Pt/Ti3C2Txand Pt/Nb2CTxcatalysts, respectively. MXene supports modulate the nature of the active sites, making them highly selective toward C–H activation. Such exploitation of the MSIs makes MXenes promising platforms with versatile chemical reactivity and tunability for facile design of supported intermetallic nanoparticles over a wide range of compositions and structures.
5 November 2018 in Journal of the American Chemical Society
15 October 2018 in Journal of the American Chemical Society
19 November 2019 in Physical Review Letters
Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully compensated antiparallel fashion, are found to be either antiparallel, but with different magnitudes, or in a nearly orthogonal arrangement in adjacent stripes in the ICMs. Ab initio calculations corroborate the low-energy state of these arrangements. Our discovery corrects the atomic understanding of ICMs in -based perovskite antiferroelectrics.