A novel approach to generate a spatially-distributed orbital angular momentum (OAM) beam array based on coherent combining technology is presented. The arrangement of the multiple fundamental Gaussian beams at the initial plane, as well as the intensity weights and the phase distributions of the array beams, is determined by the reversal of Huygens Fresnel diffraction and the greedy algorithm. This method ensures that a vortex beam array is formed at a specified distance, and the distance can be adjusted by phase modulation. The evolution properties of the synthesized beam array near the receiver plane are studied as well to estimate the robustness of the method. The experimental limitations of this technique are discussed, including the maximum number of beams, the relative separation of each beam and the maximum topological charges. The results illustrate that a spatially-distributed OAM beam array can be effectively generated within a finite distance interval, and the distance is adjustable. This new method enables further applications of a structured optical field, such as optical communication and spatial light structuring.
18 October 2017 in Science China Technological Sciences
Coexistent optical parametric oscillation (OPO) and stimulated Raman scattering (SRS) are demonstrated in an X-cut KTiOAsO4 (KTA) crystal. The 30-mm-long KTA crystal is placed within a diode-end-pumped acousto-optically (AO) Q-switched Nd:YAG laser cavity to construct an intracavity optical parametric oscillator. Coexistent Raman conversion of the fundamental wave is observed from the KTA crystal. With a diode power of 7.43 W and a pulse repetition rate (PRR) of 20 kHz, a signal (1535.0 nm) power of 0.92 W is obtained, corresponding to a diode-to-signal conversion efficiency of 12.4%. A first-Stokes (1091.4 nm) power of 0.17 W is obtained.
1 June 2018 in High Power Laser Science and Engineering
In this paper, we experimentally investigated the extreme frequency shift in high-power Raman fiber laser (RFL). The RFL was developed by using a pair of fiber Bragg gratings with fixed and matched central wavelength (1120 nm) combined with a piece of 31-m-long polarization maintaining (PM) passive fiber adopted as Raman gain medium. The pump source was a homemade high-power, linearly polarized (LP) wavelength-tunable master oscillator power amplifier (MOPA) source with tunable working range (1055–1080 nm). High-power and high-efficiency RFL with extreme frequency shift between the pump and Stokes light was explored. It is found that frequency shift located within 10.6 THz and 15.2 THz can ensure efficient Raman lasing, where the conversion efficiency is more than 95% of the maximal value, 71.3%. In addition, a maximum output power of 147.1 W was obtained with an optical efficiency of 71.3%, which is the highest power ever reported in LP RFLs to the best of our knowledge.
We present a new approach for simultaneous spectral and coherent combining in a master oscillator power amplifier (MOPA) configuration with active phasing. Spectrally combined single-frequency seed lasers are employed as a master oscillator for the all-fiber power amplifier chain, which provides robust performance suppressing of the stimulated Brillouin scattering effect, while coherent combining of spectrally combined amplifiers with active phase control provides stable in-phase combining, despite the strong phase fluctuation. In experiments, two spectrally combined seed MOPA chains are coherently combined with a total output power of . The power of the main lobe in the closed loop is two times of that value in the open loop, and visibility of more than 75% of the long-exposure interference pattern at the receiving plane is obtained.