It is essential to monitor and to diagnose faults in rotating machinery with a high thrust–weight ratio and complex structure for a variety of industrial applications, for which reliable signal measurements are required. However, the measured values consist of the true values of the parameters, the inertia of measurements, random errors and systematic errors. Such signals cannot reflect the true performance state and the health state of rotating machinery accurately. High-quality, steady-state measurements are necessary for most current diagnostic methods. Unfortunately, it is hard to obtain these kinds of measurements for most rotating machinery. Diagnosis based on transient performance is a useful tool that can potentially solve this problem. A model-based fault diagnosis method for gas turbines based on transient performance is proposed in this paper. The fault diagnosis consists of a dynamic simulation model, a diagnostic scheme, and an optimization algorithm. A high-accuracy, nonlinear, dynamic gas turbine model using a modular modeling method is presented that involves thermophysical properties, a component characteristic chart, and system inertial. The startup process is simulated using this model. The consistency between the simulation results and the field operation data shows the validity of the model and the advantages of transient accumulated deviation. In addition, a diagnostic scheme is designed to fulfill this process. Finally, cuckoo search is selected to solve the optimization problem in fault diagnosis. Comparative diagnostic results for a gas turbine before and after washing indicate the improved effectiveness and accuracy of the proposed method of using data from transient processes, compared with traditional methods using data from the steady state.
24 May 2018 in Journal of Engineering for Gas Turbines and Power
This paper proposes a hybrid method (HMRC) comprised of a radial basis function (RBF) neural net algorithm and component-level modeling method (CMM) as a real-time simulation model for triaxial gas turbines with variable power turbine guide vanes in matlab/simulink. The sample size is decreased substantially after analyzing the relationship between high and low pressure shaft rotational speeds under dynamic working conditions, which reduces the computational burden of the simulation. The effects of the power turbine rotational speed on overall performance are also properly accounted for in the model. The RBF neural net algorithm and CMM are used to simulate the gas generator and power turbine working conditions, respectively, in the HMRC. The reliability and accuracy of both the traditional single CMM model (SCMM) and HMRC model are verified using gas turbine experiment data. The simulation models serve as a controlled object to replace the real gas turbine in a hardware-in-the-loop simulation experiment. The HMRC model shows better real-time performance than the traditional SCMM model, suggesting that it can be readily applied to hardware-in-the-loop simulation experiments.
The socioeconomic status, resources and the actual energy resource demand-supply would be analyzed based on the data of five representative Green Energy County, such as Huanan County, Nong’an County, Gongzhuling County, Changtu County and Hangjinqi County. Then the common features for the counry energy consumption in the process of urbanization were summarized. The common challenges for county energy development were also pointed out in this paper. Several suggestions aimed at the Energy Project Planning for north regime in China were proposed at the end.