Following an introduction to the history of the invention of the quantum cascade (QC) laser and of the band-structure engineering advances that have led to laser action over most of the mid-infrared (IR) and part of the far-IR spectrum, the paper provides a comprehensive review of recent developments that will likely enable important advances in areas such as optical communications, ultrahigh resolution spectroscopy and applications to ultrahigh sensitivity gas-sensing systems. We discuss the experimental observation of the remarkably different frequency response of QC lasers compared to diode lasers, i.e., the absence of relaxation oscillations, their high-speed digital modulation, and results on mid-IR optical wireless communication links, which demonstrate the possibility of reliably transmitting complex multimedia data streams. Ultrashort pulse generation by gain switching and active and passive modelocking is subsequently discussed. Recent data on the linewidth of free-running QC lasers (/spl sim/150 kHz) and their frequency stabilization down to 10 kHz are presented. Experiments on the relative frequency stability (/spl sim/5 Hz) of two QC lasers locked to optical cavities are discussed. Finally, developments in metallic waveguides with surface plasmon modes, which have enabled extension of the operating wavelength to the far IR are reported.
For optical modeling and other purposes, we have created a library of 57 liquids for which we have measured the complex optical constants n and k. These liquids vary in their nature, ranging in properties that include chemical structure, optical band strength, volatility, and viscosity. By obtaining the optical constants, one can model most optical phenomena in media and at interfaces including reflection, refraction, and dispersion. Based on the works of others, we have developed improved protocols using multiple path lengths to determine the optical constants n/k for dozens of liquids, including inorganic, organic, and organophosphorus compounds. Detailed descriptions of the measurement and data reduction protocols are discussed; agreement of the derived optical constant n and k values with literature values are presented. We also present results using the n/k values as applied to an optical modeling scenario whereby the derived data are presented and tested for models of 1 µm and 100 µm layers for dimethyl methylphosphonate (DMMP) on both metal (aluminum) and dielectric (soda lime glass) substrates to show substantial differences between the reflected signal from highly reflective substrates and less-reflective substrates.
We demonstrate the design, fabrication, and characterization of single-mode low-loss waveguides for mid-infrared (MIR) wavelengths. Planar waveguide structures were fabricated from multilayer thin films of arsenic-based chalcogenide glasses followed by the creation of channel waveguides by using the photodarkening effect. Propagation losses as low as were measured for a quantum cascade laser end-fire coupled into the waveguides. This is a first step toward the design and fabrication of integrated optical components for MIR applications.
1 December 2004 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
We have recently developed vetted methods for obtaining quantitative infrared directional–hemispherical reflectance spectra using a commercial integrating sphere. In this paper, the effects of particle size on the spectral properties are analyzed for several samples such as ammonium sulfate, calcium carbonate, and sodium sulfate as well as one organic compound, lactose. We prepared multiple size fractions for each sample and confirmed the mean sizes using optical microscopy. Most species displayed a wide range of spectral behavior depending on the mean particle size. General trends of reflectance versus particle size are observed such as increased albedo for smaller particles: for most wavelengths, the reflectivity drops with increased size, sometimes displaying a factor of 4 or more drop in reflectivity along with a loss of spectral contrast. In the longwave infrared, several species with symmetric anions or cations exhibited reststrahlen features whose amplitude was nearly invariant with particle size, at least for intermediate and large size sample fractions: that is, . Trends of other types of bands (Christiansen minima, transparency features) are also investigated as well as quantitative analysis of the observed relationship between reflectance versus particle diameter.