1 September 2018 in Cement and Concrete Research
1 March 2010 in Journal of Structural Engineering
This paper presents a sensitivity-based damage identification of a three-dimensional truss tower tested in the laboratory. A finite-element model is updated by modal parameters obtained from ambient vibration measurements. The paper focuses on details of modeling and model updating. To get a realistic model, it was necessary to include eccentric connections, bending stiffness in truss members, and foundation flexibility. For model updating, a number of mathematical techniques are combined in a consistent way, including regularization of the nonlinear updating problem and its linearization. Considering all these details correctly, damage in the truss has been successfully identified. However, it is also demonstrated how neglecting some of these algorithmic details can lead to incorrect results. It is also shown how static condensation can lead to a model that is valid for the undamaged case but cannot adequately represent the damaged case.
27 February 2020 in Transport in Porous Media
8 February 2025 in Materials and Structures
19 October 2015 in MATEC Web of Conferences
Natural frequencies and damping ratios are important parameters in the design of footbridges against vibrations. Although not normally considered in calculations, non-structural elements such as the asphalt pavement and the supports can have a significant influence on the dynamic properties. In this article we present results from vibration tests conducted on four footbridges over the last few years covering a wide range of asphalt temperatures. The experiments show that both the natural frequencies and the damping ratios can change significantly with temperature. In one particular case, a variation in natural frequency of 25% has been observed between high and low asphalt temperatures. An additional damping of around 1% due to the asphalt pavement has been detected. To more clearly understand the experimental results, the bridges were also analysed numerically using a visco-elastic material for the asphalt. The analysis of the experimental results also revealed that other non-structural elements can have a large influence on dynamic properties of bridges. In two cases, the supports did not perform as expected and lead to surprising results.