1 September 2021 in Ageing Research Reviews
This work analyses different concepts for frailty diagnosis based on affordable standard technology such as smartphones or wearable devices. The goal is to provide ideas that go beyond classical diagnostic tools such as magnetic resonance imaging or tomography, thus changing the paradigm; enabling the detection of frailty without expensive facilities, in an ecological way for both patients and medical staff and even with continuous monitoring. Fried's five-point phenotype model of frailty along with a model based on trials and several classical physical tests were used for device classification. This work provides a starting point for future researchers who will have to try to bridge the gap separating elderly people from technology and medical tests in order to provide feasible, accurate and affordable tools for frailty monitoring for a wide range of users.
27 March 2015 in Journal of Intelligent Material Systems and Structures
In this work, we study the stability behavior of composite magnetorheological fluids consisting of magnetic (iron) and non-magnetic (poly(methylmethacrylate)) particles dispersed in mineral oil. Because of the opacity of the suspensions, optical methods traditionally employed for evaluation of the gravitational settling in colloidal suspensions are not suitable for sedimentation follow-up in this case. For this reason, we use an alternative method based on the evaluation of the resonant frequency of the inductance of a thin coil surrounding the sample. The movement of the coil along the height of the container at specified steps and time intervals allows obtaining information about the local volume fraction of particles inside the tube. The obtained successive profiles for the multi-component suspensions show a decrease of the iron particle settling and of the initial rate of settling as the poly(methylmethacrylate) volume fraction is increased. Finally, the increase of the poly(methylmethacrylate) concentration gives rise to an improvement of the rheological properties upon magnetic field application for a given concentration of iron. Both a strong rheological response and a good colloidal stability are essential for practical applications.
27 September 2022 in IEEE Sensors Journal
The ballistocardiogram is a graphic representation of the movements of the body associated with cardiac activity. In this paper, a ten minutes ballistocardiogram have been captured for ten different volunteers with a polymer optical fiber (POF) specklegram sensor. This transducer, which is composed by a CCD camera, a laser emitting diode and two meters of POF, allows to capture the ballistocardiogram by analyzing how the induced speckle pattern changes over the time. These changes are related to cardiac activity. Several processing methods have been compared to determine which method achieve the best performance: Complex Cepstrum, Power of Spectral Density (PSD), Pam-Tompkins algorithm, Wavelet, Autocorrelation, Savitzky-Golay filter, Mean Absolute Deviation and Hilbert transform. Accuracy and resources consumption have been characterized and compared for these methods. Hilbert, PSD and Savitzky-golay exhibit both small error and computational cost. This paper describes a baseline for main frequency determination of POF-based ballistocardiogram signals in real time.