1 March 2020 in Medical Hypotheses
29 March 2023 in Turkish Journal of Science and Technology
Due to their starting and running torque needs as well as their four-quadrant operation, modern industrial drives utilise induction motors (IM). Failures in the rotor bars of the motor can be found using the voltages and currents of each of the three phases as well as the acceleration and velocity signals. For the diagnosis of the quantity of broken rotor bars for a failed IM, conventional signal processing-based feature extraction techniques and machine learning algorithms have been applied in the past. The number of broken rotor bars is determined in this study by looking into a novel technique. For the aforementioned aims, specifically, the deep learning methodologies are studied. In order to do this, convolutional neural network (CNN) transfer learning algorithms are described. Initially, a bandpass filter is used for denoising, and then the signals are transformed using the continuous wavelet transform to create time-frequency pictures (CWT). The collected images are used for deep feature extraction and classification using the support vector machine (SVM) classifier, as well as for fine-tuning the pre-trained ResNet18 model. Metrics for performance evaluation employ categorization accuracy. Additionally, the results demonstrate that the deep features that are recovered from the mechanical vibration signal and current signal yield the greatest accuracy score of 100%. Nonetheless, a performance comparison with the publicly available techniques is also done. The comparisons also demonstrate that the proposed strategy outperforms the compared methods in terms of accuracy scores.
23 December 2019 in IEEE Access
A Permanent Magnet Hysteresis Synchronous Motor (PMHSM) is designed and implemented in this paper. The designed motor is analyzed by using simulation and experimental studies. The torque, torque ripple, speed and flux density are also analyzed by using Finite Element Analysis (FEA) method. A standard commercial stator geometry is preferred for easy installation. A new rotor structure is designed for the motor. A submersible pump turbine is connected to the prototype motor in order to test under a real pump load condition by a pump test stand. The same pump used in the experiment was also tested with a commercial induction motor (IM) submersible pump motor with same power. Thus, the commercial and proposed motor are compared in terms of static head value, which is an important value in pump applications. The performance of the motor is better than the IM because it can operate at synchronous speed without slip. In addition, the proposed motor does not require any auxiliary system to achieve starting with grid. The proposed PMHSM can be used to obtain high performance and efficiency for pump applications.
1 September 2023 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Endüstriyel sürücü sistemlerinde verimlilikleri, sağlamlıkları, güç ve boyut çeşitlilikleri nedeniyle asenkron motorlar sıklıkla kullanılmaktadırlar. Asenkron motorlarda meydana gelen kırık rotor çubuğu arızaları, sistemin verimliliğini doğrudan etkilediğinden arıza teşhisi gittikçe önem kazanmaktadır. Kırık rotor çubuğu arızalarının teşhisi için hem stator akım sinyali hem de motor titreşim sinyali kullanılmaktadır. Son zamanlarda bu konuda yapılan çalışmalarda bazı sinyal işlemle teknikleri ile birlikte makine öğrenmesi yöntemleri kullanılmaktadır. Bu çalışmada, ampirik mod ayrışımı (AMA) ve makine öğrenmesi yöntemleri kullanılarak kırık rotor çubuğu sayısının sınıflandırılması gerçekleştirilmiştir. İlk olarak arızalı motor veri setinden alınan bir faz akımı ve motor titreşim sinyali filtrelenip zarflanmıştır. İkinci adımda bu sinyaller AMA yöntemiyle 5 adet içsel mod fonksiyonuna (İMF) ayrıştırılıp spektral entropi ve anlık frekans öznitelikleri elde edilmiştir. Üçüncü adımda bu öznitelikler uç uca eklenip yeni öznitelik vektörü oluşturulmuştur. Dördüncü adımda, öznitelik vektörleri destek vektör makinesi (DVM), k en yakın komşu (KEK) ve karar ağacı (KA) makine öğrenmesi yöntemleriyle sınıflandırılmıştır. Başarı parametresi olarak sınıflandırma doğruluğu kullanılmış ve en yüksek başarı %93,9 ile DVM sınıflandırma yönteminden elde edilmiştir. Çalışmanın sonunda literatürde aynı veri seti için yapılan çalışmalar ile performans karşılaştırılması yapılmış ve bunların sonucunda kırık rotor çubuğu sayısının sınıflandırılmasının AMA ve DVM ile yapılabileceği görülmüştür.
30 July 2019 in Balkan Journal of Electrical and Computer Engineering
A modulation process is required to transmit analog signals with higher quality. Modulation is the process of transporting the signal by another carrier signal. This study aims to process analog signals. Using 200 samples of each of the six types of analog modulation modules. Nowadays these are Amplitude Modulation (AM), Double Side Band (DSB), Upper Side Band (USB), Lower Side Band (LSB), Frequency Modulation (FM) and Phase Modulation(PM) respectively. In the study an intelligent clustering method has been developed. The 5th level Discrete Wavelet Transform (DWT), Norm Entropy and Energy properties of AM, DSB, USB, LSB, FM and PM analog modulated signals have been removed during feature extraction phase. The results have been compared using K-Means, k-Medoid and Fuzzy C Mean (FCM) algorithms using a feature vector of 6x2x1200 obtained at the feature extraction stage and carrying out smart intelligent clustering for recognition. The most successful result has been obtained with FCM of 85.75%.00