19 June 2020 in Nature Communications
Submarine channels are the primary conduits for terrestrial sediment, organic carbon, and pollutant transport to the deep sea. Submarine channels are far more difficult to monitor than rivers, and thus less well understood. Here we present 9 years of time-lapse mapping of an active submarine channel along its full length in Bute Inlet, Canada. Past studies suggested that meander-bend migration, levee-deposition, or migration of (supercritical-flow) bedforms controls the evolution of submarine channels. We show for the first time how rapid (100–450 m/year) upstream migration of 5-to-30 m high knickpoints can control submarine channel evolution. Knickpoint migration-related changes include deep (>25 m) erosion, and lateral migration of the channel. Knickpoints in rivers are created by external factors, such as tectonics, or base-level change. However, the knickpoints in Bute Inlet appear internally generated. Similar knickpoints are found in several submarine channels worldwide, and are thus globally important for how channels operate.
20 May 2022 in Science Advances
Until recently, despite being one of the most important sediment transport phenomena on Earth, few direct measurements of turbidity currents existed. Consequently, their structure and evolution were poorly understood, particularly whether they are dense or dilute. Here, we analyze the largest number of turbidity currents monitored to date from source to sink. We show sediment transport and internal flow characteristic evolution as they runout. Observed frontal regions (heads) are fast (>1.5 m/s), thin (<10 m), dense (depth averaged concentrations up to 38% vol ), strongly stratified, and dominated by grain-to-grain interactions, or slower (<1 m/s), dilute (<0.01% vol ), and well mixed with turbulence supporting sediment. Between these end-members, a transitional flow head exists. Flow bodies are typically thick, slow, dilute, and well mixed. Flows with dense heads stretch and bulk up with dense heads transporting up to 1000 times more sediment than the dilute body. Dense heads can therefore control turbidity current sediment transport and runout into the deep sea.
1 January 2020 in Geological Society, London, Special Publications
Turbidity currents transport globally significant volumes of sediment and organic carbon into the deep-sea and pose a hazard to critical infrastructure. Despite advances in technology, their powerful nature often damages expensive instruments placed in their path. These challenges mean that turbidity currents have only been measured in a few locations worldwide, in relatively shallow water depths (<<2 km). Here, we share lessons from recent field deployments about how to design the platforms on which instruments are deployed. First, we show how monitoring platforms have been affected by turbidity currents including instability, displacement, tumbling and damage. Second, we relate these issues to specifics of the platform design, such as exposure of large surface area instruments within a flow and inadequate anchoring or seafloor support. Third, we provide recommended modifications to improve design by simplifying mooring configurations, minimizing surface area and enhancing seafloor stability. Finally, we highlight novel multi-point moorings that avoid interaction between the instruments and the flow, and flow-resilient seafloor platforms with innovative engineering design features, such as feet and ballast that can be ejected. Our experience will provide guidance for future deployments, so that more detailed insights can be provided into turbidity current behaviour, in a wider range of settings.
19 January 2023 in Earth and Planetary Science Letters
6 March 2023 in Natural Hazards
We report results of numerical simulations of a potential subaerial landslide on the coast of Orcas Island and the resultant tsunami waves in the southern Strait of Georgia near the US/Canada border. A likely trigger is strong ground shaking during large earthquakes on the nearby Holocene active Skipjack Island fault zone. For a worst-case scenario, we assume a 0.17 $${\textrm{km}}^3$$ rigid subaerial failure on the steep northeast coast of the island, spanning the $$\sim$$ 5 km between previous landslide deposits on the adjacent seafloor. The landslide motion and resulting tsunami generation are modeled using the three-dimensional (3D) non-hydrostatics physics-based NHWAVE model. The simulated failure moves downslope with a peak velocity of 13.64ṁ/s and travels 732 m before coming to rest after 85 s in 75-m water depth. Tsunami propagation is then continued using the 2D fully nonlinear and dispersive Boussinesq wave model FUNWAVE-TVD in a succession of layered and nested grids. The modeling reveals susceptible locations, particularly as waves will arrive with little or no warning. In the near-source region, modeled waves have peak amplitudes of 15–20 m, current speeds of up to 10 m/s, and runup of up to 30 m. Smaller, but significant, wave amplitudes and runup occur throughout the region surrounding Orcas Island. In the tsunami propagation direction, runup reaches 7.5 m at Neptune Beach near Lummi Bay. Both initial and reflected waves cause significant runup (> 1.5 m) along much of the shoreline between Point Roberts and Lummi Bay.