1 July 2000 in Physical Review E
Excitation of wakefields from a short charge bunch moving parallel to the axis of a dielectric-lined cylindrical waveguide is analyzed. This situation amounts to generation of Cerenkov radiation in a transversely bounded system. Wakefields are expanded into an orthonormal set of hybrid electric-magnetic eigenfunctions for this waveguide geometry. The orthonormalization relations for this system are obtained, evidently for the first time, both for a stationary source and for a localized moving source such as a charge bunch; it is shown that these orthonormalization relations differ. Forces arising from wakefields are found, valid within and behind a distributed bunch. Deviation of bunch distribution from axisymmetry leads to generation of dipole modes of significant amplitude that may lead to instability. Poynting’s theorem is examined for this system, and it is shown that convected Coulomb field energy must be subtracted from the Poynting flux to obtain the radiation power. This power, which balances drag on the bunch as calculated directly from the fields, is shown to flow in a direction opposite to that of the charge bunch. The results are easily generalized to bunches of arbitrary length and charge distribution, and to a train of such bunches. Numerical examples are presented for monopole, dipole, and quadrupole wakefield forces, and sample electric field patterns are shown to assist in understanding the unusual nature of this type of Cerenkov radiation. For a 2-nC rectangular drive bunch of length 0.20 mm, moving along the axis of an alumina-lined waveguide with inner and outer radii of 0.50 and 5.0 mm, a peak accelerating gradient behind the bunch of 155 MeV/m is predicted. This relatively high magnitude of accelerating gradient suggests that a simple uniform dielectric pipe could be the basis for the structure of a future high-gradient electron/positron linear accelerator, once low-emittance, kiloampere, subpicosecond electron bunches are available in the laboratory.
22 June 2009 in Physical Review Special Topics - Accelerators and Beams
A new scheme for a dielectric wakefield accelerator is proposed that employs a cylindrical multizone dielectric structure configured as two concentric dielectric tubes with outer and inner vacuum channels for drive and accelerated bunches. Analytical and numerical studies have been carried out for such coaxial dielectric-loaded structures (CDS) for high-gradient acceleration. An analytical theory of wakefield excitation by particle bunches in a multizone CDS has been formulated. Numerical calculations are presented for an example of a CDS using dielectric tubes with dielectric permittivity 5.7, having external diameters of 2.121 and 0.179 mm with inner diameters of 2.095 and 0.1 mm. An annular 5 GeV, 6 nC electron bunch with rms length of 0.035 mm energizes a wakefield on the structure axis having an accelerating gradient of with a transformer ratio . The period of the accelerating field is . If the width of the drive bunch channel is decreased, it is possible to obtain an accelerating gradient of while keeping the transformer ratio approximately the same. Full numerical simulations using a particle-in-cell code have confirmed results of the linear theory and furthermore have shown the important influence of the quenching wave that restricts the region of the wakefield to within several periods following the drive bunch. Numerical simulations for another example have shown nearly stable transport of drive and accelerated bunches through the CDS, using a short train of drive bunches.
18 December 2001 in Physical Review Special Topics - Accelerators and Beams
A new accelerator, LACARA (laser-driven cyclotron autoresonance accelerator), under construction at the Accelerator Test Facility at Brookhaven National Laboratory, is to be powered by a 1 TW laser beam and a 50 MeV injected electron pulse. LACARA will produce inside a 2 m, 6 T solenoid a 100 MeV gyrating electron bunch, with energy spread, approximately 1 psec in length with particles advancing in phase at the laser frequency, executing one cycle each 35 fsec. A beamstop with a small off axis channel will transmit a short beam pulse every optical cycle, thereby producing a train of about 30, 3.5 fsec long, 1–3 pC microbunches for each laser pulse. We describe here a novel accelerator, a micron-scale dielectric wake field accelerator driven by a 500 MeV LACARA-type injector that takes the output train of microbunches and transforms them into a near-rectangular cross section having a narrow dimension of and height of using a magnetic quadrupole; these bunches may be injected into a planar dielectric-lined waveguide (slightly larger than the bunch) where cumulative buildup of wake fields can lead to an accelerating gradient . This proposed vacuum-based wake field structure is physically rigid and capable of microfabrication accuracy, factors important in staging a large number of accelerator modules. Furthermore, the accelerating gradients it promises are comparable with those for plasma accelerators. A LACARA unit for preparing suitable bunches at 500 MeV is described. Physics issues are discussed, including bunch spreading and transport, bunch shaping, coherent diffraction radiation from the aperture, dielectric breakdown, and bunch stability in the rectangular wake field structure.
26 July 2010 in Physical Review Special Topics - Accelerators and Beams
A novel cavity structure is described that could be the basis for a two-beam, high-gradient, accelerator. Versions of the structure could be used for acceleration of beams of electrons, positrons, muons, protons, or heavier ions; with either electron or proton drive beams. The structure embodies cavities that are excited in several harmonically related eigenmodes, such that rf fields reach their peak values only during small portions of each basic rf period. This feature could help raise breakdown and pulse heating thresholds. The two-beam accelerator structure comprises chains of these cavities. In this configuration, no transfer elements are needed to couple rf energy from the drive beam to the accelerated beam, since both beams traverse the same cavities. Purposeful cavity detuning is used to provide much smaller deceleration for a high-current drive beam, than acceleration for a low-current accelerated beam, i.e., to provide a high transformer ratio. A self-consistent theory is presented to calculate idealized acceleration gradient, transformer ratio, and efficiency for energy transfer from the drive beam to the accelerated beam, for either parallel or antiparallel motion of the beams. The theory has been cast in dimensionless quantities so as to facilitate optimization with respect to efficiency, acceleration gradient, or transformer ratio, and to illuminate the interdependence of these parameters. Means for dramatically shortening the structure fill time are also described. However, no beam dynamics analysis is presented, so the range of parameters within which this new acceleration concept can be used will remain uncertain until it is established that stable beam transport along the structure using an appropriate focusing system is possible.
27 May 2004 in Physical Review Special Topics - Accelerators and Beams
A tall, dielectric-lined rectangular wakefield microstructure is analyzed as a possible element of an advanced linear wakefield accelerator. This accelerator would be driven by a train of fs electron microbunches that would be chopped out of a longer bunch using a powerful laser and then formed into a train of rectangular-profile bunches using a quadrupole. The bunches set up a periodic wakefield in the microstructure that can be built up to , for example, using a train of ten 3-fs 1-pC bunches. Two major issues are examined. First, interference is studied using the particle-in-cell code KARAT between transition radiation and Cerenkov wakefield radiation, both set up by the passage of a charge bunch through a dielectric structure of finite length. Of significance is the difference in propagation speeds of transition radiation and Cerenkov radiation (which travels almost at the vacuum light speed ) and the magnitude of the respective fields. Second, stability is examined for drive and accelerated bunches using computations of test particle orbits in the longitudinal and transverse wakefields excited by the drive bunches. It is found that nearly all test electrons in the drive bunches are confined within the structure for a travel distance of 30 cm or more, while test electrons located in an accelerated bunch can have stable motion over greater than 30 cm without passing through the structure walls.
26 May 2010 in Physical Review Letters
We consider an axisymmetric microwave cavity for an accelerator structure whose eigenfrequency for its second lowest TM-like axisymmetric mode is twice that of the lowest such mode, and for which the fields are asymmetric along its axis. In this cavity, the peak amplitude of the rf electric field that points into either longitudinal face can be smaller than the peak field which points out. Computations show that a structure using such cavities might support an accelerating gradient about 47% greater than that for a structure using similar single-mode cavities, without an increase in breakdown probability.