The constitution of the soft n-type magnesium ferrite in the hard cobalt ferrite nanoparticles was prepared using the hydrothermal chemical method and varied incrementally in a polyol-supported material. The MgxCo1-xFe2O4 nanoparticles exhibited uniform spherical morphology as observed in SEM analysis, while TEM confirmed well-dispersed particles with sizes ranging from 15 to 20 nm. Three phases of the material viz. Mg0.1Co0.9Fe2O4 (MCF101), Mg0.3Co0.7Fe2O4 (MCF103) and Mg0.5Co0.5Fe2O4 (MCF105) were prepared and utilised for the adsorption removal of methylene blue (MeB) dye from aqueous solution. The adsorption efficiency of 5 mg L–1 MeB ranged from 58-85% at pH 2.0, 50 min of stirring time and 1.0 g L–1 of adsorbent. Results indicated the gradual increase in Mg proportions has led to an enhancement in the removal efficiency in order MCF105, better than MCF103 and finally MCF101. Kinetic studies showed that the experimental results best matched the pseudo-second-order kinetics model and the film diffusion process was a rate-limiting phase. Equilibrium findings were well-fitted by the Langmuir isotherm model, with R2 = 0.986-0.989 and maximal monolayer capacity (qmax) of 148-163 mg g–1. The Freundlich isotherm analysis showed that the adsorption intensity parameter (n) exceeded unity for MCF103 and MCF105 confirmed favourable adsorption on these materials. MCF101, in contrast, exhibited behaviour characteristic of cooperative adsorption. The Temkin isotherm analysis indicated negligible lateral repulsive interactions among the adsorbed species.