6 October 1999 in Human Genetics
22 October 2021 in Progress of Theoretical and Experimental Physics
We have investigated a prototype triggerless data acquisition (DAQ) system for charmed-baryon spectroscopy at J-PARC. A special time-to-digital converter (TDC) dedicated to continuous timing measurement without any external trigger was developed. A high dynamic range of the order of 1010 for the timing measurement was realized by introducing the heartbeat method, which periodically generates a delimiter datum. DAQ software receiving and filtering the data stream from the TDCs was also developed based on a message-queue application programming interface (API), FairMQ. We tested the prototype DAQ system with detectors using electrons and positrons converted from a bremsstrahlung photon beam with a rate condition of up to 1.9 MHz/1-mm detector segment. The DAQ received a 5.4 Gbps data stream from six TDCs and merged them to a complete data set. After sorting a certain portion of the data, the software searched for a set of corresponding data fragments in response to the penetration of a positron or electron using time separation between detector hits in the time axis and removed unnecessary hits. Around 25 GB RAM and 25 CPU threads were required for the online computing power under the test conditions. No silent data drop in the DAQ software was observed.
22 January 2004 in Journal of Human Hypertension
6 August 2022 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
10 April 2023 in IEEE Transactions on Nuclear Science
This paper presents a clock distribution system based on a clock-centric modulation technique called clock-duty-cycle-modulation (CDCM) using the IOSERDESE2 primitives of Xilinx field programmable gate array (FPGA). The implemented CDCM techniques, CDCM-10-1.5 and CDCM-10-2.5, transfer 1-bit and 2-bit data per clock cycle by changing the trailing edge positions, respectively. This is the first work to succeed transmitting multi-bits per clock cycle by the CDCM. The developed system consists of the CDCM-based transceiver and the link layer protocol. All the components are implemented using the regular bunk functions in FPGA. The system is independent from a FPGA high-speed serial transceiver and does not require a clock data recovery circuit. In this work, two clock generators were utilized for clock recovery; one is a jitter cleaner IC, CDCE62002 from Texas Instruments, and the other is mixed-mode clock manager (MMCM) in FPGA. The 8-bit incremental data was transmitted by the CDCM modulated clock signal through an optical fiber. The jitters of the clock signals recovered by CDCE62002 were 5.8 and 6.8 ps in standard deviation for CDCM-10-1.5 and CDCM-10-2.5, respectively, when the reference clock frequency was 125 MHz. The averaged phase change of the recovered clock signal during the data transmission was smaller than 10 ps with respect to the clock phase recovered from the signal with the duty cycle of 50%. The obtained bit-error-rate (BER) was smaller than 10 -13 .
13 February 2025 in IEEE Transactions on Nuclear Science
This study proposes a clock synchronization protocol using the functionalities of IDELAYE2 and IOSERDESE2 primitives of an AMD Xilinx field-programmable gate array (FPGA) to serve as a general-purpose data-streaming type time-to-digital converter (TDC) for particle and nuclear physics experiments. A clock synchronization protocol called local area common clock protocol (LACCP) was developed as the upper layer protocol of a proprietary link (MIKUMARI), which was defined prior to this work by a community of users from the experimental physics field in Japan. Clock synchronization is realized using a round-trip time measurement with the system clock period and a fine offset time estimation, which corresponds to the clock signal phase difference between the primary and secondary FPGAs. The fine offset measurement is based on information from the IDELAYE2 and ISERDESE2 primitives utilized as the physical layer of the MIKUMARI link. No extra component is used. The LACCP can be implemented in an FPGA using general IO pin pairs for serial transmission and reception. A streaming high-resolution TDC (Str-HRTDC) was developed based on a tapped-delay-line (TDL) built from CARRY4 primitives in the AMD Xilinx Kintex-7 FPGA. It continuously measures the timing with 19.5-ps intrinsic resolution in $\sigma $ and provides unique timestamp information over 2.4 h by introducing the time frame structure defined and synchronized by LACCP. The clock synchronization accuracy and the timing resolution were evaluated by connecting four modules with optical fibers up to 100 m in length. No cable length dependence was confirmed. The obtained synchronization accuracy was approximately 300 ps. The timing resolution between two synchronized modules was 23.1 ps in $\sigma $ .