11 January 2013 in Energy & Environmental Science
Thermoelectric materials have garnered considerable attention due to their unique ability to directly convert heat to electricity and vice versa. Polymers carry many intrinsic advantages such as low thermal conductivity, solution processability, and roll-to-roll production for fabricating high-performance, light-weight, and flexible thermoelectric modules. In this review, we highlight recent advances in the preparation, modification and optimization of polymer thermoelectric materials, focusing especially on the current state-of-the-art strategies to minimize the thermal conductivity and maximize the power factor, and finally provide an outlook on the future development of this field.
7 September 2011 in Angewandte Chemie International Edition
14 June 2012 in Energy & Environmental Science
The energy-filtering effect was successfully employed at the organic–inorganic semiconductor interface of poly(3-hexylthiophene) (P3HT) nanocomposites with the addition of Bi2Te3 nanowires, where low-energy carriers were strongly scattered by the appropriately engineered potential barrier of the P3HT–Bi2Te3 interface. The resulting P3HT–Bi2Te3 nanocomposites exhibited a high power factor of 13.6 μW K−2 m−1 compared to that of 3.9 μW K−2 m−1 in P3HT. The transport characteristics of nanocomposites, including the carrier concentration, mobility, and energy-dependent scattering parameter, were revealed by the experimental measurements of electrical conductivity, Seebeck coefficient, and Hall coefficient to quantitatively elucidate the carrier energy scattering at the P3HT–Bi2Te3 interface. The ability to rationally engineer the organic–inorganic semiconductor interfaces of polymer nanocomposites to achieve an improved Seebeck coefficient and power factor provides a potential route to high-performance, large-area, and flexible polymer thermoelectric materials.
19 February 2016 in Angewandte Chemie International Edition
1 November 2013 in Journal of Materials Chemistry A
Perovskite solar cells have garnered great attention in recent years as promising high performance next-generation solar cells with long-term stability at low cost. Since the seminal work of Miyasaka and others in 2009, the power conversion efficiency (PCE) of perovskite-based dye-sensitized solar cells (DSSCs) has rapidly increased from 3.8% to 15% over the past four years, exceeding the highest efficiency of conventional organic dye-sensitized DSSCs. Recently, the perovskite has been demonstrated to act successfully as an active layer in simple planar-heterojunction solar cells with no need of complex nanostructured DSSC architectures, leading to an attractively high PCE of 15.4% at a competitive low manufacturing cost. In this Feature Article, we aim to review the recent impressive development in perovskite solar cells, and discuss the prognosis for future progress in exploiting perovskite materials for high efficiency solar cells.