The development of mixed-criticality systems that integrate applications of different criticality levels (safety, security, real-time and non real-time) can provide multiple benefits such as product cost-size-weight reduction, reliability increase and scalability. However, the integration of applications with different criticality levels leads to several challenges with respect to safety certification standards. This paper defines a safety certification strategy for IEC-61508 compliant industrial mixed-criticality systems based on multicore partitioning. This approach is illustrated with a safety concept of a simplified IEC-61508 compliant wind-turbine mixed-criticality system, reviewed and approved by a certification authority.
In this paper we present the model-based development (MBD) of a real-time simulator of a CANopen absolute encoder for the functional verification of real-time elevator controllers. Our contribution is a case-study on the present capabilities and limitations of two commercial MBD environments to support the development of real-time test components and their deployment into reconfigurable computing platforms. We discuss the rationale for the model design, the selection of development tools, the validation of the model and its real-time implementation, and how we considered the computing platform constraints when modeling the system. We describe the step-by-step synthesis and deployment of the encoder simulator in the FPGA of a commercial-of-the-shelf NI cRIO real-time controller. We also discuss specific integration and portability issues that arose when migrating the simulator to a variant of the hardware platform. From this experience we conclude that it is possible to successfully use a single model to program diverse HiL devices, provided that both the limits of the model-to-code translators and the IP integration capabilities in the MDB environments were examined beforehand. Finally we put forward an outlook about forthcoming model-based developments of the test system.
Simulation-based testing has been found to be an effective testing technique for complex systems. One of the prevalent modeling and simulation tools is MATLAB/Simulink, which allows, among other advantages, the integration of software with complex mathematical models and automatic code generation. However, we found a set of limitations with this tool in the vertical transport domain, where different elevator car instances need to be simultaneously simulated during the test and validation stages. To solve these limitations, this paper presents a co-simulation architecture that is capable of simulating several elevator car instances both in a single computer as well as in a distributed manner in multiple computers. We evaluated the approach with an industrial case study. The results of our evaluation suggest that the proposed tool is appropriate to simulate up to 14 elevator car instances simultaneously.
The development and certification of safety critical embedded systems require the implementation of fault-tolerance mechanisms to ensure the safe operation of the system even in the presence of faults. These mechanisms need to be verified and validated by means of fault injection. Simulated fault injection enables an early dependability assessment that validates the correct implementation of fault-tolerance mechanisms and reduces the risk of late and expensive discovery of safety related pitfalls. This paper presents a novel modeling and simulation framework for time-triggered safety critical embedded systems. Our approach supports simulated fault injection at different abstraction levels (platform independent and platform specific models) and integrates a time-triggered automatic test executor for the early verification and validation of the systems. The feasibility of the proposed framework is illustrated with a case study where a simplified railway signaling system is modeled and simulated at different levels of abstraction.
The increase in the amount of functionalities provided by safety-critical systems in the last years has lead to a complexity growth in these systems. Several techniques have been developed in order to tackle this issue, including simplification strategies and the definition of time-deterministic models of computation (MoCs) and architectures, such as the Logical Execution Time MoC (LET) and the Time-Triggered Architecture (TTA) respectively. Although TTA based systems relying on the LET MoC have already been successfully applied to safety-critical systems, SystemC, the nowadays de-facto standard in HW/SW system development, does not provide a LET-based simulation engine for the modeling and assessment of these systems. With the aim to fill this gap, this paper presents the PI-TTM, a novel SystemC extension for the modeling and simulation of LET based safety-critical embedded systems.