Jos J. G. M. van der Tol

Jos J. G. M. van der Tol

Auto-generated profile, based on publicly available information

Jos J. G. M. van der Tol

Institute of Photonic Integration (IPI), Eindhoven University of Technology, Eindhoven, The Netherlands

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2019 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
JTJos J. G. M. van der Tol
Jos J. G. M. van der Tol
YJYuqing Jiao
Yuqing Jiao
JEJorn P. Van Engelen
Jorn P. Van Engelen
VPVadim Pogoretskiy
Vadim Pogoretskiy
AKAmir Abbas Kashi
Amir Abbas Kashi
KWKevin Williams
Kevin Williams
InP membranes have appeared in the last decade as a viable integrated photonics platform, suitable for adding photonic functions to silicon electronics. It combines the strengths of silicon photonics (high index contrasts and therefore small footprint devices) with those of generic InP-platforms (monolithic integration of active and passive devices). A range of functionalities has been developed on this platform, which goes by the name of IMOS (Indium phosphide membrane on silicon). Competitive performances have been demonstrated for lasers, fast detectors, waveguides, filters, couplers, modulators and more. Here we provide an overview of IMOS and describe recent developments regarding technology and devices. This includes record low propagation losses, plasmonic waveguides, a variety of laser structures and improved wavelength demuliplexers. These developments demonstrate that IMOS has potential to deliver photonic integrated circuits to a wide variety of application fields, e.g. telecom, datacom, sensing, terahertz and many others.

3 October 2011 in IET Optoelectronics
Verified
Journal Article
Closed access
JTJ. van der Tol
J. van der Tol
RZR. Zhang
R. Zhang
JPJ. Pello
J. Pello
FBF. Bordas
F. Bordas
GRG. Roelkens
G. Roelkens
MSM. Smit
M. Smit
A new photonic integration technique is presented, which enables the use of indium-phosphide-based membranes on top of silicon chips. This can provide the electronic chips (complementary metal-oxide semiconductor (CMOS)) with an added optical layer (indium-phosphide membrane on silicon (IMOS)) for resolving the communication bottleneck. Very small passive devices have been realised, with performances comparable to other membrane devices (propagation loss 7 dB/cm, negligible bending loss for micron size radii, 3 dB splitter with 0.6 dB excess loss, resonator with Q-factor of 15.500). Also, a new passive device is introduced, a 4.12 micron long polarisation converter which in simulations promises broadband performance and tolerant fabrication. Finally, an active/passive regrowth technique is investigated for submicron active regions within an otherwise mostly passive membrane. A good morphology is obtained around the interfaces between the active and passive regions. The processing involved did not damage the materials severely, so that light emission in micro-PL measurements was found. However, an increasing blue shift with decreasing size occurred, due to quantum well intermixing. Optimising the design and the processing can take care of this. Taken together, the results presented here show that it is feasible to realise extremely small passive and active devices in a photonic circuit in an InP membrane.

1 February 1994 in IEEE Photonics Technology Letters
Verified
Journal Article
Open access
MDM.O. van Deventer
M.O. van Deventer
JTJ.J.G.M. van der Tol
J.J.G.M. van der Tol
ABA.J. Boot
A.J. Boot
In case of a large number of channels and a limited available optical bandwidth (limited laser tuning range) it may be necessary to chose a channel spacing near 0 or 11 GHz, where Rayleigh-and Brillouin backscattering introduce crosstalk in a bidirectional system. Although there is much literature on stimulated Brillouin scattering, that occurs at high powers, there is hardly any attention paid to what happens at relatively low input powers. Furthermore there are no system measurements which thoroughly investigate these effects. The authors performed extensive bidirectional system experiments to investigate the crosstalk from Brillouin scattering in more detail, including its polarization properties. They found, that, while for high powers most of the energy is backscattered to a 11 GHz lower frequency, for low powers there is no difference for the crosstalks at 11 GHz higher or 11 GHz lower than the signal frequency. The power budget is limited to 40 dB for both cases. The predicted 33.3% degree of polarization of low-power Brillouin scattering is experimentally confirmed for the first time.

10 December 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Weiming YaoWeiming Yao
Weiming Yao
XLXiao Liu
Xiao Liu
MMM. K. Matters-Kammerer
M. K. Matters-Kammerer
AMArezou Meighan
Arezou Meighan
MSMarc Spiegelberg
Marc Spiegelberg
KWKevin Williams
Kevin Williams
Intimate integration of photonics with electronics is regarded as the key to further improvement in bandwidth, speed and energy efficiency of information transport systems. Here, a method based on wafer-scale polymer bonding is reviewed which is compatible with foundry-sourced high-performance InP photonics and BiCMOS electronics. We address challenges with respect to circuit architecture, co-simulation framework and interconnect technology and introduce our approach that can lead to broadband high-density interconnects between photonics and electronics. Recent proof-of-concept work utilizing DC-coupled driver connections to modulators, which significantly reduces the interconnect complexity, is summarized. Furthermore, co-simulation concepts based on equivalent circuit models are discussed with emphasis on the importance of impedance matching between driver and modulator. Finally, realizations of broadband interconnects and functional photonic building blocks after wafer bonding are highlighted to demonstrate the potential of this wafer-scale co-integration method.

24 November 2022 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
HPHamed Pezeshki
Hamed Pezeshki
PLPingzhi Li
Pingzhi Li
RLReinoud Lavrijsen
Reinoud Lavrijsen
JTJos J. G. M. van der Tol
Jos J. G. M. van der Tol
BKBert Koopmans
Bert Koopmans
In this paper, we propose a compact integrated hybrid plasmonic-photonic device for optical reading of nanoscale magnetic bits with perpendicular magnetic anisotropy in a magnetic racetrack on top of a photonic waveguide on the indium phosphide membrane on silicon platform. The hybrid device is constructed by coupling a doublet of V-shaped gold plasmonic nanoantennas on top of the indium phosphide waveguide. By taking advantage of the localized surface plasmons, our hybrid device can enable detection of the magnetization state in magnetic bits beyond the diffraction limit of light and enhance the polar magneto-optical Kerr effect (PMOKE). We further illustrate how combining the hybrid device with a plasmonic polarization rotator provides magneto-optical read-out by transforming the PMOKE-induced polarization change into an intensity variation of the waveguide mode. According to the simulation results based on a three-dimensional finite-difference time-domain method, the hybrid device can detect the magnetization states in targeted bits in a magnetic racetrack medium down to ~100×100 nm 2 , regardless of the magnetization state of the rest of the racetrack with a relative intensity contrast of greater than 0.5% for a ~200×100 nm 2 magnetic bit. We believe our hybrid device can be an enabling technology that can connect integrated photonics with nanoscale spintronics, paving the way toward ultrafast and energy efficient advanced on-chip applications.

2 December 2020 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
AKAmir Abbas Kashi
Amir Abbas Kashi
JTJos J. G. M. Van der Tol
Jos J. G. M. Van der Tol
KWKevin A. Williams
Kevin A. Williams
Weiming YaoWeiming Yao
Weiming Yao
MLMichael S. Lebby
Michael S. Lebby
YJYuqing Jiao
Yuqing Jiao
For the first time, we present an electro-optic slot waveguide phase modulator on the InP membrane on Silicon (IMOS) platform. Low-frequency characterization of this modulator shows that it can achieve a Vπ Lπ product as low as 4.5 V.mm and an extinction ratio equal to 10.6 dB. The 3-dB optical bandwidth of this modulator is measured to be 10.5 GHz. Here, working principles, design, fabrication, measurements, analysis of the electrical and electro-optic performance and prospects of this modulator are presented.