30 March 2022 in IEEE Access
The need for antennas with small dimensions with high performance has prompted various research to conduct experiments in terms of the structure and shape of the antenna and terms of material. This study proposes utilizing both artificially and engineered magneto-dielectric (MD) materials’ characteristics to miniaturize antenna dimension and improve antenna performance. The MD characteristics are realized through the SRR array structure as an antenna performance enhancer; and material synthesis as an antenna dimension reducer. MD material has been successfully synthesized, extracted, and characterized from a mixture of magnetite powder (Fe 3 O 4 ), PDMS elastic polymer material (polydimethylsiloxane), and BaFe 12 O 19 . The parametric study results show that the antenna designed on MD material Sample C (PDMS: Fe 3 O 4 =1: 0.6) with a 3 $\times $ 3 SRR configuration gives the most optimal response. Simulations, optimizations, and measurements have been carried out to obtain an MD antenna that works at a frequency of 3.5 GHz, with a fractional bandwidth of 10% (360 MHz), radiation efficiency of 58.54%, and a maximum gain of up to 4.33 dBi. This antenna measures 30 $\times30$ mm or 64% smaller than conventional antennas. The proposed stacked MD antenna is compatible with 5G technology in the mid-band frequency range.
13 November 2020 in Advanced Electromagnetics
This study proposes a simple artificial magneto-dielectric (MD) antenna with a split-ring resonator (SRR) loaded in an array configuration. This SRR element is used to realize the MD characteristic that is beneficial for antenna miniaturization. The simulation of material permittivity and permeability is conducted to ensure that the proposed SRR-array configuration has the expected MD characteristic. Configurations of SRR in arrays of 3×3, 5×5, 7×7, and 9 × 9 are realized to obtain its radiation characteristics when embedded in the antenna ground plane. A rectangular patch antenna is used in this study. Based on the simulation, the proposed antenna with an SRR array of 5×5 achieves excellent MD characteristics with high permittivity and permeability of 32.44 and 51.39, respectively. Furthermore, a microstrip antenna loaded with the SRR 5×5 arrays are fabricated on RT/duroid 5880 substrate. It has a dimension of 0.31λ0 × 0.26λ0. The simulation and measurement results of the proposed antenna show a fractional bandwidth of 4.79% and 5.2% at 1.5 GHz; and a maximum gain of 5.20 dB and 4.95 dB, respectively. Good agreement between the simulated and the measured results was achieved.
18 February 2026 in IEEE Microwave and Wireless Technology Letters
In this paper, a compact tri-band bandpass filter (TBPF) is proposed. The proposed TBPF employs a multicoupled-line structure to achieve an independence between the inter-passbands. In addition, the triple-band bandpass characteristics are generated separately and independently using two pairs of quarterwavelength resonators with L- and U-shaped configurations. The two pair of resonators were set backto-back creates a second order filter and coupling to the stub transmission lines. The pairs of U resonators create mode splitting results two resonances frequency at 1.87 GHz and 5.82 GHz while two pairs of L resonator create bandpass with a wide $-3$ dB bandwidth of 21.6% at 3.35 GHz center frequency. The two of three passband frequencies can be set and designed independently. Consequently, the proposed TBPF achieves a 46.4% size reduction compared to the previously reported TBPF. To validate its performance, the filter was fabricated and measured. The measurement results are in close agreement with the simulations. Overall, the proposed TBPF exhibits compact dimensions and independently controlled inter-passband characteristics.