31 May 2019 in ACS Applied Nano Materials
19 November 2018 in Nanotechnology
In this work, we report on the p-i GaAsSb/AlGaAs nanowires (NWs) ensemble device exhibiting good spectral response up to 1.1 μ m with a high responsivity of 311 A W −1 , an external quantum efficiency of 6.1 × 10 4 %, and a detectivity of 1.9 × 10 10 Jones at 633 nm. The high responsivity of the NWs has been attributed to in situ post-growth annealing of GaAsSb axial NWs in the ultra-high vacuum. The enabling growth technology is molecular beam epitaxy for the Ga-assisted epitaxial growth of these NWs on Si (111) substrates. Room temperature Raman spectra, as well as temperature dependent micro-photoluminescence peak analysis indicated suppression of band tail states and non-radiative channels due to annealing. A similar improvement in in situ annealed p-i GaAsSb NW ensemble with an AlGaAs passivating shell was inferred from a reduction in the Schottky barrier height as well as the NW resistance compared to the as-grown NW ensemble. These results demonstrate in situ annealing of nanowires to be an effective pathway for improving the optoelectronic properties of the NWs and the device thereof.
1 February 2016 in Discover Nano
The effects of ex-situ annealing in a N2 ambient on the properties of GaAs/GaAsSbN/GaAs core-multi-shell nanowires on Si (111) substrate grown by self-catalyzed molecular beam epitaxy (MBE) are reported. As-grown nanowires exhibit band edge emission at ~0.99 eV with a shoulder peak at ~0.85 eV, identified to arise from band tail states. A large red shift of 7 cm−1 and broadened Raman spectra of as-grown nanowires compared to that of non-nitride nanowires confirmed phonon localization at N-induced localized defects. On annealing nanowires to 750 °C, there was no change in the planar defects in the nanowire with respect to the as-grown nanowire; however, vanishing of the photoluminescence (PL) peak corresponding to band tail states along with enhanced band edge PL intensity, recovery of the Raman shift and increase in the Schottky barrier height from 0.1 to 0.4 eV clearly point to the efficient annihilation of point defects in these GaAsSbN nanowires. A significant reduction in the temperature-induced energy shift in the annealed nanowires is attributed to annihilation of band tail states and weak temperature dependence of N-related localized states. The observation of room temperature PL signal in the 1.3 μm region shows that the strategy of adding small amounts of N to GaAsSb is a promising route to realization of efficient nanoscale light emitters with reduced temperature sensitivity in the telecommunication wavelength region.
25 October 2018 in Semiconductor Science and Technology
The advancement of ternary GaAsSb mismatched alloy system toward the Sb-rich corner of the phase diagram in the nanowire (NW) configuration on silicon remains a challenge. A large lattice mismatch between the silicon substrate and GaAsSb with an Sb-rich composition, along with the low supersaturation and low solubility of Sb in the Ga droplet in the vapor–liquid–solid growth mechanism, causes significant issues during Ga-assisted molecular beam epitaxial growth of these NWs. In this work, we have carried out a systematic study of Sb-rich GaAs
1–
x
Sb
x
NWs grown on Si (111) using variations of the Ga, As, and Sb beam equivalent pressures (BEP) to minimize undesirable parasitic growth and achieve photoemission up to 1.7 μ m. Ga-assisted molecular beam epitaxy is the enabling growth technology for the growth of these self-catalyzed GaAs
1–
x
Sb
x
( x > 0.8) NWs. The use of a dual substrate temperature approach along with low As background pressure and a low Ga BEP were found to be the key growth components in achieving a well-faceted NW morphology with a low parasitic layer on the substrate. Energy-dispersive x-ray spectroscopy analysis confirms uniform compositional homogeneity along the NWs, while selected-area electron diffraction patterns in the transmission electron microscope revealed a zinc-blende crystal structure. A peak μ -photoluminescence emission of 1680 nm with a narrow FWHM was obtained at 4 K. Raman spectra at room temperature exhibit only GaSb related LO and TO modes, which attest to the high quality of the NWs grown. This is a promising approach due to the broad scope of applicability to grow other mismatched alloy material systems in a NW configuration.
16 April 2019 in Nanotechnology
We report on the bandgap engineering of the GaAsSb/GaAsSbN heterostructured nanowires (NWs) in the core–shell architecture using the unique properties of dilute nitride material system for near-infrared photodetection. A high density of vertical GaAsSb/GaAsSb(N)/GaAlAs core-multishell configured NWs with well faceted, smooth surface morphology has been grown on Si (111) substrates using Ga-assisted molecular beam epitaxy. A low Sb content GaAsSb core has been shown to enable the coherently strained growth of dilute nitride shell with higher Sb content in GaAsSbN shell NWs. A systematic study of N and V/III beam equivalent pressure ratios is carried out to achieve the large band-gap reduction, while successfully incorporating higher Sb content in the dilute nitride shells (GaAs
1−
x
Sb
x
N; x = 0.27). The incorporation of N acts to relieve strain and provide a smooth surface morphology as well as redshift the 4K photoluminescence (PL) peak energy by ∼160 meV in comparison to a non-nitride shell. The selected area diffraction pattern confirms zinc-blende structure in all the NWs and did not show any noticeable planar defects in dilute nitride NWs. We successfully, thus demonstrate GaAsSb/GaAsSbN/GaAlAs core–shell NWs by engineering the lattice strain of nitride shell with the non-nitride ternary core, for extending the 4K photoemission up to 1.43 μ m.
26 October 2017 in Semiconductor Science and Technology
Bandgap reduction of 10% by incorporation of a dilute amount of N is reported for the first time, in axial GaAsSb nanowires (NWs) grown on Si (111) via Ga-assisted molecular beam epitaxy. Impact of N incorporation on the surface morphology, NW growth kinetics, and their structural and optical properties were examined. Dilute nitride NWs with Sb composition of 7 at% did not exhibit any noticeable planar defects, as revealed by the absence of satellite twin peaks in the selected-area diffraction pattern and high-resolution transmission electron microscopy imaging. Point defects were also minimal in as-grown dilute nitride NWs, as ascertained from the comparison of low-temperature photoluminescence spectra as well as the shape and shift of Raman modes, with in situ annealed NWs in different ambients. Evidence of enhanced incorporation of N was found in the NWs in situ annealed in N ambient, but with deteriorated optical quality due to simultaneous creation of N-induced defects. The lack of any noticeable defects in the as-grown GaAsSbN NWs demonstrates the advantage of the vapor–liquid–solid mechanism responsible for growth of axial configuration over the vapor–solid growth mechanism for core–shell NWs as well as their thin film counterpart, which commonly exhibit N-induced point defects.